Airtac GFC Combination Unit GFC300C08MF1
The AirTAC GFC Combination Unit GFC300C08MF1 is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFC Combination Unit GFC300C08MF1
The GFC is AirTAC's two-unit air preparation set: a filter-regulator plus a separate lubricator, so filtration, pressure regulation and oil-mist lubrication come under one part number. This configuration is the size 300 set with PT1/4 ports (PT thread), a manual drain on the filter bowl, the standard 40 um filter element and the embedded square pressure gauge scaled in MPa (F1). The bowls are polycarbonate at this size, the maximum working pressure is 1.0 MPa (145 psi), and because the drain is manual the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi).
This is a genuine AirTAC part from the G series, offered in sizes 200, 300, 400 and 600 with ports from 1/8 in. to 1 in. and in PT, G (BSPP) and NPT threads. Flow for the series is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet and sizing for your application on request.
Airtac GFC Combination Unit GFC300C08MF1 Technical Specifications
| Model | Airtac GFC Combination Unit GFC300C08MF1 |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFC Combination Unit GFC300C08MF1
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-C0 filter regulator and GL300-C0 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · See datasheet · 40 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-C0 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac GFC Combination Unit GFC300C08MF1 Is Used
Conveyor diverters and stops in distribution centres
Conditions the air supply to diverter gates, stops and pusher cylinders on sortation conveyors, protecting the valves from water and scale while lubricating the cylinder seals.
Air-tool outlets in farm equipment workshops
Feeds impact wrenches, air hammers and grease-gun pumps at a workshop bench, holding a set working pressure and delivering oil mist to keep the tools running.
Carton taping and case-packing stations
Prepares air for the clamp and press cylinders on case-packing machinery, with the regulator fixing line pressure and the filter removing condensate ahead of the valves.
Is the Airtac GFC Combination Unit GFC300C08MF1 the Right Set?
Size 300 with 1/4 in. ports sits mid-range: choose 200 for compact circuits or 400/600 as air demand and piping grow, and match the port to your pipe rather than to a quoted flow number. Drain options are differential-pressure (default), automatic or manual - this set is manual, so an operator vents the bowl and the wider 0.05-0.9 MPa regulating window applies. No W in the code means the standard 40 um element; the 5 um grade is available for more particle-sensitive downstream equipment. Gauge: this set uses the embedded square gauge in MPa (F1); the external round gauge and psi/bar scales are the other decodable options. PT is the standard thread; G and NPT are orderable thread options. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-C0 filter regulator on its own.
Airtac GFC Combination Unit GFC300C08MF1 FAQ
There is no single rated flow figure to quote: AirTAC publishes flow for the G series as curves. Tell us your operating pressure and air demand and we will confirm the appropriate sizing from the datasheet on request.
F1 is the embedded square gauge with an MPa scale. The external round gauge is the C option, and scale codes 2 and 3 switch the reading to psi and bar. A version without a gauge would be coded N instead.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GFC Combination Unit GFC300C08MF1
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.