Airtac GFC Combination Unit GFC300C08MN
The AirTAC GFC Combination Unit GFC300C08MN is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFC Combination Unit GFC300C08MN
GFC300C08MN is an AirTAC GFC two-unit air-preparation set: a GFR300 filter regulator plus a GL300 lubricator. The 300 size carries PT1/4 ports (PT is the standard thread; G and NPT are orderable options). This configuration has a manual-drain bowl and the standard 40 um filter element; the N in the code means no gauge is fitted, so downstream pressure is set by counting regulator turns or adding a gauge version later. Maximum inlet pressure is 1.0 MPa (145 psi); with the manual drain the regulator adjusts from 0.05-0.9 MPa (7-130 psi). Operating temperature is -5 to 70 C, non-freezing, with polycarbonate bowls at this size.
This is a genuine AirTAC part supplied by us as a distributor. The GFC family covers sizes 200, 300, 400 and 600 with 1/8 inch to 1 inch ports, plus gauge, drain, filter-grade, thread and check-valve choices. Flow for the 300 size is published as curves, not a single rating, so ask us to confirm the datasheet and correct sizing on request before ordering.
Airtac GFC Combination Unit GFC300C08MN Technical Specifications
| Model | Airtac GFC Combination Unit GFC300C08MN |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFC Combination Unit GFC300C08MN
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-C0 filter regulator and GL300-C0 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · See datasheet · 40 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-C0 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac GFC Combination Unit GFC300C08MN Is Used
Workshop air-drop for hand tools
Conditions the wall drop feeding pneumatic drills, ratchets and blow guns in a maintenance workshop, with the lubricator misting tool motors and the manual drain for end-of-week purging.
Case-packing conveyor actuators
Supplies the pusher and clamp cylinders on a case-packing conveyor, holding the set working pressure downstream while the 40 um element catches line dirt and water.
Process skid valve actuation
Prepares air for air-operated quarter-turn valves on a process skid, giving the actuator supply a set regulated pressure without adding a second gauge to an already-gauged panel.
Is the Airtac GFC Combination Unit GFC300C08MN the Right Set?
This code is the no-gauge, standard-grade version of the 300-size two-unit set. Pick it when a panel gauge already exists or the setting is checked occasionally, and choose the MF1 variant instead if you want a square MPa gauge built in. Port and flow: PT1/4 on size 300; step to 400 or 600 for larger demand. Drain is manual here; automatic and differential-pressure drains are alternatives. Filter grade is the 40 um standard; the W code gives 5 um. Thread is PT as standard with G (BSPP) and NPT available to order. Because flow is published as curves rather than a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-C0 filter regulator on its own.
Airtac GFC Combination Unit GFC300C08MN FAQ
AirTAC does not publish a single rated flow for the 300 size; performance is given as flow curves. Share your line pressure and air demand and we will confirm the sizing from the datasheet on request.
The N in the code means no pressure gauge is supplied, which keeps the cost and panel depth down. Gauge-equipped variants exist with square or round dials in MPa, psi or bar scales, and the standard 40 um element can be swapped for the 5 um W version at order time.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GFC Combination Unit GFC300C08MN
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.