Airtac GFC Combination Unit GFC300C10MF1W
The AirTAC GFC Combination Unit GFC300C10MF1W is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFC Combination Unit GFC300C10MF1W
The AirTAC GFC two-unit set pairs a filter-regulator with a lubricator, giving filtered, regulated and oil-lubricated compressed air from one matched pair of units. This GFC300C10MF1W is the 300 size with 3/8 in ports on PT thread (PT is the standard; G and NPT are catalogue options). The bowl drains manually, the element is the finer 5 um W grade, and a square pressure gauge on the MPa scale is fitted. Maximum inlet pressure is 1.0 MPa (145 psi); on this manual-drain version the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi). Working temperature is -5 to 70 C, non-freezing, and the filter bowl at this size is PC (polycarbonate).
This is a genuine AirTAC part. The G series runs in 200, 300, 400 and 600 sizes with stepped ports, and options include the standard 40 um element, automatic or differential-pressure drains, alternative gauge scales, G (BSPP) or NPT threads and mounting brackets. Flow is published as curves rather than a single rated figure, so ask us to confirm sizing and request the datasheet for this exact code.
Airtac GFC Combination Unit GFC300C10MF1W Technical Specifications
| Model | Airtac GFC Combination Unit GFC300C10MF1W |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFC Combination Unit GFC300C10MF1W
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-C1 filter regulator and GL300-C1 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · See datasheet · 40 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-C1 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac GFC Combination Unit GFC300C10MF1W Is Used
Instrument air on a test bench
Feeds pneumatic gauges and measuring devices on a lab or QC bench, where the 5 um element keeps fine debris away from sensitive instruments and the regulator sets a stable test pressure.
Sealing-jaw cylinders on a packaging machine
Supplies the heat-seal actuator circuit: water and fine particles removed, sealing pressure set at the regulator, and a light oil mist carried to the cylinder seals.
Pilot-air supply on a CNC pallet changer
Conditions the air feeding pilot-operated valves on machine-tool clamping, where the 5 um grade and steady regulated pressure help the pilots seat reliably.
Is the Airtac GFC Combination Unit GFC300C10MF1W the Right Set?
Choose the 300 size with PT3/8 ports when your line's flow band sits between the smaller 200 and larger 400 units; step sizes only in whole steps, as the port changes with each. Manual drain (M) means an operator opens the bowl drain periodically - automatic (A) and differential-pressure (blank) drain codes exist for unattended points. The W element's 5 um grade suits pilot valves and cleaner-air duties; the 40 um standard element remains available. This code carries the square MPa gauge; N codes omit the gauge, and psi (2) or bar (3) scales can be ordered. PT is the standard thread - order G (BSPP) or NPT if your pipework needs it. Flow is given as catalogue curves, not a single rating, so ask us to confirm this size against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-C1 filter regulator on its own.
Airtac GFC Combination Unit GFC300C10MF1W FAQ
AirTAC publishes G-series flow as curves rather than a single rated figure, so we do not state a number here. Share your duty cycle and we will confirm this 300 size, PT3/8 code against the datasheet on request.
The standard 40 um element suits general cylinder and valve supply; the W option's 5 um grade is for applications wanting finer filtration, such as pilot valves and instruments. This code already carries the 5 um element - the plain MF1 code gives 40 um.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GFC Combination Unit GFC300C10MF1W
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.