Airtac GFC Combination Unit GFC300C15MNW
The AirTAC GFC Combination Unit GFC300C15MNW is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFC Combination Unit GFC300C15MNW
The GFC300C15MNW is an AirTAC G-series two-unit set: a filter-regulator plus a lubricator, providing filtration, pressure regulation and oil-mist lubrication in one ordered package. This configuration is size 300 with PT1/2 ports, drains the filter bowl manually, carries the finer 5 um filter element (code W) instead of the standard 40 um, and is ordered without a pressure gauge (code N). At size 300 the bowls are polycarbonate. Maximum working pressure is 1.0 MPa (145 psi); with the manual-drain arrangement the regulator adjusts from 0.05-0.9 MPa (7-130 psi). Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part supplied for the US market. The G series spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, and catalogue options include G (BSPP) or NPT threads, automatic or differential-pressure drains, 40 um or 5 um elements, square or round gauges with MPa, psi or bar scales, and a reverse/check valve. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application.
Airtac GFC Combination Unit GFC300C15MNW Technical Specifications
| Model | Airtac GFC Combination Unit GFC300C15MNW |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFC Combination Unit GFC300C15MNW
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-C1 filter regulator and GL300-C1 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · See datasheet · 40 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-C1 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac GFC Combination Unit GFC300C15MNW Is Used
Lab automation actuator supply
Feeds grippers and lift cylinders on laboratory automation where the 5 um element supports cleaner conditioned air than the standard grade.
Printing press cylinder air
Conditions air for impression and delivery cylinders on a press line, where the 5 um element and steady regulated pressure support consistent sheet handling.
R&D rig tool and cylinder drops
Serves test rigs and prototype cells where one manual-drain FRL point conditions 1/2 in branch air for both hand tools and actuated fixtures.
Is the Airtac GFC Combination Unit GFC300C15MNW the Right Set?
Size 300 with PT1/2 ports sits mid-range in the G series; drop to 200 or step up to 400 where the circuit needs less or more flow, since larger sizes carry larger ports and more flow. Manual drain suits points of use that are drained by hand, while automatic and differential-pressure drain versions serve unattended bowls. The W code selects the 5 um element - the finer filtration choice over the standard 40 um - so order the plain code where 40 um is sufficient. This set is ordered without a gauge; square or round gauges with MPa, psi or bar scales are available on other codes. PT is the standard thread, with G (BSPP) and NPT as catalogue options. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-C1 filter regulator on its own.
Airtac GFC Combination Unit GFC300C15MNW FAQ
AirTAC publishes G-series flow as curves, not as a single rated figure, so no number is quoted on this page. Send your application pressure and demand and we will confirm the flow figures from the datasheet on request.
The W code selects the 5 um element for finer particulate removal; the blank code is the standard 40 um grade. Both are offered across the GF, GFR, GFC and GC families, so pick 5 um where the downstream equipment calls for finer filtration and 40 um for general plant air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GFC Combination Unit GFC300C15MNW
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.