Airtac GFR Filter Regulator GFR300C10AF1
The AirTAC GFR Filter Regulator GFR300C10AF1 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFR Filter Regulator GFR300C10AF1
The AirTAC GFR300C10AF1 is a G-series filter regulator: one body that removes water and particulate from compressed air and holds downstream pressure at a set point. This 300-size unit has a PT3/8 port, an automatic drain that discharges condensate without operator attention, a standard 40 um element, and the F-coded square pressure gauge on an MPa scale. No reverse valve is fitted. As an automatic-drain regulator its adjustment range is 0.15-0.9 MPa (20-130 psi), with a maximum inlet pressure of 1.0 MPa (145 psi).
This is a genuine AirTAC part. G-series filter regulators come in 200, 300, 400 and 600 sizes with ports from 1/8" to 1", drain choices of differential-pressure, automatic or manual, 40 um or 5 um elements, and PT, G or NPT threads; working temperature is -5 to 70 C, non-freezing. The 300-size polycarbonate bowl suits this mid-range port. Flow is published as curves rather than a single rating, so we confirm flow and full datasheet figures on request.
Airtac GFR Filter Regulator GFR300C10AF1 Technical Specifications
| Model | Airtac GFR Filter Regulator GFR300C10AF1 |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFR Filter Regulator GFR300C10AF1
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Where the Airtac GFR Filter Regulator GFR300C10AF1 Is Used
Assembly plant air drops
Filtering and regulating the 3/8 air drops that feed torque tools and pneumatic screwdrivers along an assembly plant line, with the automatic drain handling condensate at each drop.
Truck service bay tools
Conditioning shop air for impact wrenches and tyre-cage circuits in a commercial truck service bay, where the square MPa gauge gives a clear set-point readout at the wall station.
Packaging machine setup station
Supplying regulated air to the setup and adjustment circuits of a carton packaging machine, where technicians reset pressure at changeover using the built-in square gauge.
Is the Airtac GFR Filter Regulator GFR300C10AF1 the Right Unit?
Pick this 300 size when the branch line needs a 3/8 port and the flow demand has moved past the GFR200 body. The F1 code specifies the square gauge on an MPa scale; the embedded square gauge is the base option and the round external gauge is the C alternative. The automatic drain here keeps condensate off the maintenance route - choose manual or differential-pressure drains where that fits the cell better. The 40 um element is the standard grade; add W for the 5 um option only when downstream equipment needs it. Thread is PT as standard, with G (BSPP) and NPT available as catalogue options, and a bracket is included unless J is specified. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
Airtac GFR Filter Regulator GFR300C10AF1 FAQ
Flow is published for this series as curves, not as a single rated figure, so there is no one number to state. Share your inlet pressure, set pressure and demand, and we will confirm the flow and the full datasheet on request before you order.
F selects the square pressure gauge and 1 sets its scale to MPa. The square gauge is the embedded type; the C code instead orders the external round gauge on the same MPa scale. The rest of the code reads: 300 size, 10 port (PT3/8), A automatic drain, standard 40 um element, no check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac GFR Filter Regulator GFR300C10AF1
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.