Airtac GFR Filter Regulator GFR300C15AJC1W
The AirTAC GFR Filter Regulator GFR300C15AJC1W is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFR Filter Regulator GFR300C15AJC1W
The GFR300C15AJC1W is a genuine AirTAC G-series filter regulator: filtration and pressure regulation combined in one body, with a drain bowl and no lubricator. This configuration is a 300-size unit on a 1/2" PT port, with automatic drain, the finer 5 um filter element (code W), an external round gauge with MPa scale, and no mounting bracket (code J). It removes water and fine particulate from compressed air, drains condensate on its own, and holds the downstream pressure you set.
As a genuine AirTAC part it carries the catalogue specification for the series: maximum inlet pressure 1.0 MPa (145 psi), regulation range 0.15-0.9 MPa (20-130 psi) with automatic or differential-pressure drain, operating temperature -5 to 70 C (non-freezing), medium compressed air only, and a polycarbonate bowl at size 300. The GFR family is available in 200, 300, 400 and 600 sizes with 40 um or 5 um elements, differential, automatic or manual drains, MPa/psi/bar gauge scales, G (BSPP) or NPT thread options, and bracket or no-bracket builds. AirTAC publishes flow as curves rather than a single rated figure, so we confirm flow and datasheet figures on request before you order.
Airtac GFR Filter Regulator GFR300C15AJC1W Technical Specifications
| Model | Airtac GFR Filter Regulator GFR300C15AJC1W |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFR Filter Regulator GFR300C15AJC1W
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Where the Airtac GFR Filter Regulator GFR300C15AJC1W Is Used
Paint spray booth supply
Conditions the 1/2" air feed to a spray booth, where the 5 um element reduces carryover of fine particulate to the finish ahead of the gun's own regulator.
Bottling line valve actuators
Regulates clean air to the fill-head and valve actuators on a bottling line, with automatic drain clearing condensate through continuous production runs.
Laboratory air bench
Filters and regulates bench air for lab pneumatic apparatus on a half-inch supply, where the finer 5 um grade suits sensitive downstream equipment.
Is the Airtac GFR Filter Regulator GFR300C15AJC1W the Right Unit?
Size to the job: 200 suits 1/8"-1/4" lines, 300 covers 3/8"-1/2", and 400/600 step up for larger ports and higher demand - this 300 model sits on a 1/2" PT port. The W code fits the 5 um element for finer filtration than the 40 um standard - the main decode choice on this unit. It has automatic drain and an external round MPa gauge instead of the embedded square one, and code J means no mounting bracket. G (BSPP) and NPT threads are orderable options instead of the PT standard. AirTAC publishes flow as curves, not a single rating - ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
Airtac GFR Filter Regulator GFR300C15AJC1W FAQ
AirTAC publishes G-series flow as performance curves rather than a single rated figure, so there is no one number to quote. Tell us your line pressure and downstream demand and we will confirm the datasheet flow for this 300-size, 1/2" unit on request.
The blank code is the 40 um standard element for general plant air; code W (this unit) fits a 5 um element for finer protection of valves, cylinders and process equipment. Both carry the same catalogue specification otherwise; note that published flow is given as curves, which we confirm against your application on request.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac GFR Filter Regulator GFR300C15AJC1W
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.