Airtac GFR Filter Regulator GFR300C15ANW
The AirTAC GFR Filter Regulator GFR300C15ANW is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFR Filter Regulator GFR300C15ANW
The AirTAC GFR series is a filter regulator: one body that removes water and particulate in a drain bowl and then regulates downstream pressure. This GFR300C15ANW is the 300 size with PT1/2 (1/2") ports, an automatic drain that clears condensate unaided, and the optional fine 5 um filter element (W) in place of the 40 um standard. No gauge is fitted (N); a mounting bracket is included.
This is a genuine AirTAC part. The GFR family runs from size 200 to 600, with PT standard threading plus G and NPT options and a choice of drain types and filter grades, and we confirm flow and datasheet figures on request.
Airtac GFR Filter Regulator GFR300C15ANW Technical Specifications
| Model | Airtac GFR Filter Regulator GFR300C15ANW |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFR Filter Regulator GFR300C15ANW
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Where the Airtac GFR Filter Regulator GFR300C15ANW Is Used
Laboratory pneumatic instrument supply
Conditioning the air feeding lab pneumatic actuators and sample-handling devices, where the 5 um element keeps fine debris out of sensitive components and the regulator holds a stable set pressure.
Pneumatic tool stations in a maintenance shop
At workbenches where air tools and small cylinders are used, it dries and cleans the supply with the fine element and lets technicians dial in the pressure each task needs.
Electronics assembly pick-and-place
Supplying the vacuum generators and air cylinders of a pick-and-place module, it protects the fine components from moisture and particles and maintains the steady pressure the placement cycle expects.
Is the Airtac GFR Filter Regulator GFR300C15ANW the Right Unit?
Use this code when your 1/2" line needs both regulation and finer-than-standard filtration: the 5 um element (W) is the choice for circuits feeding pneumatic valves, precision cylinders or instruments that the 40 um standard element leaves exposed. The automatic drain keeps the bowl clear without operator attention, and the adjustment range with automatic drain is 0.15-0.9 MPa (20-130 psi) at up to 1.0 MPa (145 psi) inlet, working from -5 to 70 C. Order the non-W version if 40 um is sufficient, and a gauge variant if you need local pressure readout. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
Airtac GFR Filter Regulator GFR300C15ANW FAQ
There is no single rated flow to design around: AirTAC publishes G-series flow as curves. Send us your line size and air demand and we will confirm from the datasheet on request that the 300 size with PT1/2 ports covers your application.
The standard 40 um element suits general plant air for cylinders and actuators. Choose the 5 um (W) version, like this GFR300C15ANW, when the downstream equipment - precision valves, instruments, air bearings or fine nozzles - needs finer protection from particles. Everything else in the decode stays the same: PT1/2 ports, automatic drain, no gauge, PT thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac GFR Filter Regulator GFR300C15ANW
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.