Airtac GFR Filter Regulator GFR400C10ANK
The AirTAC GFR Filter Regulator GFR400C10ANK is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFR Filter Regulator GFR400C10ANK
The AirTAC GFR series is a filter regulator: it removes water and particulate from compressed air and holds a steady downstream pressure in a single body. This 400-size unit is supplied with 3/8 in. PT ports, a polycarbonate bowl with automatic drain, the standard 40 um filter element, and no pressure gauge fitted. The trailing K marks a reverse (check) valve built into the unit. With the automatic drain, the outlet pressure is adjustable over 0.15-0.9 MPa (20-130 psi), maximum inlet pressure is 1.0 MPa (145 psi), and the working temperature range is -5 to 70 C.
This is a genuine AirTAC part. G series filter regulators come in 200, 300, 400 and 600 sizes with ports from 1/8 in. to 1 in., a choice of differential-pressure, automatic or manual drain, an optional 5 um element, gauge options, an optional reverse valve, and G (BSPP) or NPT threads to order. Flow is published as curves rather than a single rating, so ask us and we will confirm the datasheet figures for your application.
Airtac GFR Filter Regulator GFR400C10ANK Technical Specifications
| Model | Airtac GFR Filter Regulator GFR400C10ANK |
|---|---|
| Series | GFR400 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFR Filter Regulator GFR400C10ANK
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · See datasheet · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-C1 (two-unit set) |
Where the Airtac GFR Filter Regulator GFR400C10ANK Is Used
Pneumatic clamping fixture
Regulated supply to the clamping cylinders on a machining fixture, specified with the reverse (check) valve version of the filter regulator.
Air-actuated workholding on a lathe
Filtered, regulated air for the collet-closer circuit of a turning cell, ordered in the check-valve configuration.
Robotic gripper cell
Conditioned air to the gripper and valve manifold in a robot handling cell where the check-valve version is called up in the layout.
Is the Airtac GFR Filter Regulator GFR400C10ANK the Right Unit?
Size 400 with 3/8 in. PT ports sits mid-range in the G series; step down to 300 or up to 600 if your circuit's flow sits elsewhere - we can check the published flow curves against your demand before you order. This version has the automatic drain, which discharges condensate without attention; manual and differential-pressure drains are available on the same body. The standard element is 40 um; the W suffix gives 5 um. The unit is supplied without a gauge - an embedded square gauge or an external round gauge with MPa, psi or bar scales can be ordered. The K suffix adds the reverse (check) valve; leave it off if you do not need one. PT thread is standard and G (BSPP) or NPT are order options.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
Airtac GFR Filter Regulator GFR400C10ANK FAQ
AirTAC publishes flow for the G series as performance curves rather than a single rated figure, so we do not quote one number here. Tell us your application and we will confirm the sizing against the datasheet curves before you order.
It marks a reverse (check) valve fitted in the unit, on top of the normal filtering and regulating function; the version without the K has no check valve. If you need the exact check-valve behaviour confirmed for your circuit, ask us and we will send the datasheet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac GFR Filter Regulator GFR400C10ANK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.