Airtac GFR Filter Regulator GFR400C10MF1WK
The AirTAC GFR Filter Regulator GFR400C10MF1WK is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFR Filter Regulator GFR400C10MF1WK
The GFR400C10MF1WK is an AirTAC G-series filter regulator combining a fine 5 um filter element (W code) with a built-in reverse (check) valve (K code): water and particulate removal, pressure regulation and backflow prevention in one body. This configuration is the 400 size with a 3/8 in PT port and a manual drain you open by hand to empty the bowl. An embedded square gauge on an MPa scale shows the regulated pressure, the adjustment range is 0.05-0.9 MPa (7-130 psi), maximum inlet pressure is 1.0 MPa (145 psi), and the working range is -5 to 70 C, non-freezing. The 400-size bowl is polycarbonate (PC).
This is a genuine AirTAC part from the G-series 200/300/400/600 size range, with catalogue options across port sizes, thread types (PT standard, with G and NPT as orderable variants), drain types, the 40 um and 5 um filter grades, gauges and the K check-valve code. Series flow is published as performance curves rather than a single rated figure, so we confirm sizing and full datasheet figures on request.
Airtac GFR Filter Regulator GFR400C10MF1WK Technical Specifications
| Model | Airtac GFR Filter Regulator GFR400C10MF1WK |
|---|---|
| Series | GFR400 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFR Filter Regulator GFR400C10MF1WK
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · See datasheet · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-C1 (two-unit set) |
Where the Airtac GFR Filter Regulator GFR400C10MF1WK Is Used
Process valve actuation skid
Feed the pneumatic actuators on a process valve skid with fine-filtered, regulated air, with the check valve helping hold the setpoint if the supply header dips.
Precision fixture clamping
Supply the clamping fixtures on a precision machining fixture with clean, regulated air, keeping fine particulate out of the small control valves downstream.
Test rig instrumentation air
Provide filtered, regulated air to the pneumatic portion of a hydraulic-pneumatic test rig, with hand draining of the bowl between test campaigns.
Is the Airtac GFR Filter Regulator GFR400C10MF1WK the Right Unit?
Choose the size and port on the 200/300/400/600 ladder; this 400 body carries a 3/8 in PT port. Two codes matter here: W selects the 5 um fine element instead of the 40 um standard, and K fits the reverse/check valve so downstream pressure is held against backflow. Drain is manual (M), with automatic and differential-pressure variants available; manual drain gives the wider 0.05-0.9 MPa (7-130 psi) adjustment range. The square gauge reads in MPa, with psi/bar scales and an external round gauge as options. Thread is PT standard, G (BSPP) and NPT orderable; J omits the bracket. Flow is published as curves, not a single rating - ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
Airtac GFR Filter Regulator GFR400C10MF1WK FAQ
AirTAC publishes G-series capacity as performance curves rather than a single rated-flow figure, so we do not state a number here. Send us your line pressure and air demand and we will confirm sizing and the curve figures from the datasheet on request.
W selects the 5 um fine filter element instead of the 40 um standard, for cleaner air to sensitive downstream equipment. K specifies a built-in reverse (check) valve that blocks backflow and helps hold the regulated downstream pressure if the supply drops. Drop either letter to order the same 400-size, 3/8 in PT body without that feature.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac GFR Filter Regulator GFR400C10MF1WK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.