Airtac GFR Filter Regulator GFR400C10MJC1W
The AirTAC GFR Filter Regulator GFR400C10MJC1W is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFR Filter Regulator GFR400C10MJC1W
The GFR400C10MJC1W is an AirTAC G-series filter regulator combining water and particulate filtration with pressure regulation in one body, with a drain bowl and no lubricator. The W code fits the finer 5 um filter element instead of the 40 um standard. This 400-size unit has a 3/8 in PT port, a manual drain, an external round pressure gauge with MPa scale, and no mounting bracket (J code). With manual drainage the regulator adjustment range is 0.05-0.9 MPa (7-130 psi); maximum working (inlet) pressure is 1.0 MPa (145 psi) and operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part from the G series, available in 200, 300, 400 and 600 sizes with ports from 1/8 in to 1 in, and options covering drain type, filter grade, gauge style and scale, and PT, G or NPT threads. Flow is published as curves rather than one rated figure, so contact us and we will confirm the datasheet figures on request.
Airtac GFR Filter Regulator GFR400C10MJC1W Technical Specifications
| Model | Airtac GFR Filter Regulator GFR400C10MJC1W |
|---|---|
| Series | GFR400 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFR Filter Regulator GFR400C10MJC1W
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · See datasheet · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-C1 (two-unit set) |
Where the Airtac GFR Filter Regulator GFR400C10MJC1W Is Used
Laboratory instrument air
Deliver finely filtered, regulated air to analytical instruments and sample-handling actuators in a lab, where the 5 um element guards against particulates reaching sensitive components.
Air bearing and nozzle feed
Supply clean regulated air to air bearings, air tables and blowing nozzles on handling equipment, where coarser filtration could pass debris into small orifices.
Paint and coating line supply
Condition air for spray guns and coating applicators on a finishing line, using 5 um filtration downstream of the main dryer and the round gauge to hold the set delivery pressure.
Is the Airtac GFR Filter Regulator GFR400C10MJC1W the Right Unit?
Specify this code when your application needs the finer 5 um filtration (W) - for example to protect sensitive downstream components - rather than the standard 40 um element; the trade-off is a denser element, so confirm sizing with us. The 400 size and 3/8 in PT port suit mid-range circuits; move to 600 or 300 depending on the flow and port step you need. Manual drain (M) means condensate is released by hand; A (automatic) and the blank differential-pressure drain are the other catalogue choices. Round MPa gauge is fitted here, with square embedded gauges and other scales available; the bracket is omitted (J) but optional, and G or NPT threads can be ordered instead of PT.
Flow data for this series is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
Airtac GFR Filter Regulator GFR400C10MJC1W FAQ
AirTAC publishes G-series flow as performance curves, not a single rated number, and the 5 um element in this W version is a factor in sizing. Share your application flow requirement with us and we will confirm the datasheet figures for this 400-size, 3/8 in PT unit on request.
The W code fits a 5 um element for finer particulate removal, suited to sensitive components such as precision valves, nozzles and instruments; the blank code is the standard 40 um grade for general plant air. Both are offered across the G-series filter regulator range, so pick the grade that matches what your downstream equipment tolerates.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac GFR Filter Regulator GFR400C10MJC1W
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.