Airtac GFR Filter Regulator GFR400C10NW
The AirTAC GFR Filter Regulator GFR400C10NW is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFR Filter Regulator GFR400C10NW
The AirTAC GFR400C10NW is a filter regulator fitted with the fine 5 um (W) filter element: filtration and pressure regulation in one body, with no lubricator. This configuration is the 400 size with a 3/8in PT port, a differential-pressure drain that bleeds condensate from the polycarbonate bowl as the pressure drop rises, and no gauge (N code). Maximum working pressure is 1.0 MPa (145 psi), the regulator adjustment range is 0.15-0.9 MPa (20-130 psi) with this drain type, and the operating temperature range is -5 to 70 C.
This is a genuine AirTAC part. The G-series filter regulators span the 200, 300, 400 and 600 sizes with 1/8in to 1in ports, differential-pressure, automatic or manual drains, 40 um standard or 5 um (W) elements, embedded square or optional external round gauges in MPa, psi or bar scales, an optional check (reverse) valve and PT, G or NPT threads. Flow is published as curves rather than a single rating, so we confirm the datasheet and sizing figures for your application on request.
Airtac GFR Filter Regulator GFR400C10NW Technical Specifications
| Model | Airtac GFR Filter Regulator GFR400C10NW |
|---|---|
| Series | GFR400 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFR Filter Regulator GFR400C10NW
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · See datasheet · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-C1 (two-unit set) |
Where the Airtac GFR Filter Regulator GFR400C10NW Is Used
Laboratory instrument air supply
Feed fine-filtration air to lab analysers and pneumatic sample-handling devices, where 5 um elements keep particles out of sensitive pilot valves and actuators.
Optical-inspection station actuation
Regulate and fine-filter the air operating clamps and part-flip actuators at an optical inspection station, protecting the small pilot valves that position each part.
Control-valve positioner air
Supply cleaned, regulated air to pneumatic valve positioners on a process skid, where the 5 um element guards the positioner's internal orifices from particulate.
Is the Airtac GFR Filter Regulator GFR400C10NW the Right Unit?
Specify this W-coded unit instead of the standard 40 um version when downstream equipment - pilot valves, air bearings, sensing lines - needs finer filtration than general plant air. The 400 size takes a 3/8in PT port here, with 06 through 25 port codes across the series for smaller or larger branches. The differential-pressure drain is the no-touch default; automatic (A) drains continuously and manual (M) on demand, with the manual version widening the regulator range to 0.05-0.9 MPa (7-130 psi). No gauge is fitted in this code; an embedded square gauge or an external round gauge in MPa, psi or bar scales can be added at order time. PT is the standard thread, with G (BSPP) and NPT as catalogue options, and the mounting bracket is included.
Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
Airtac GFR Filter Regulator GFR400C10NW FAQ
AirTAC publishes G-series flow as curves rather than a single rated figure, so there is no single number to quote. Tell us your line pressure, set pressure and air demand and we will confirm the sizing from the datasheet on request.
The W code fits a 5 um element for fine filtration, suited to pilot-operated valves, positioners and instrumentation. The standard element is 40 um, which suits general plant air and actuation. Note that finer elements load up faster in dirty air, so drain choice and bowl inspection matter more; the differential-pressure drain in this code handles condensate automatically as the pressure drop rises.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac GFR Filter Regulator GFR400C10NW
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.