Airtac GFR Filter Regulator GFR400C15AC1
The AirTAC GFR Filter Regulator GFR400C15AC1 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFR Filter Regulator GFR400C15AC1
GFR is AirTAC's filter regulator family: filtration and pressure regulation combined in one body, with a drain bowl and no lubricator. This GFR400C15AC1 is the 400 size with a 1/2 in PT port (PT is the standard thread; G and NPT are catalogue options), an automatic drain, the standard 40 um element and an external round pressure gauge scaled in MPa. With the automatic drain, the setting range is 0.15-0.9 MPa (20-130 psi); maximum inlet pressure is 1.0 MPa (145 psi).
This is a genuine AirTAC part, rated -5 to 70 C (non-freezing), with the 400 size bowl in polycarbonate (PC). The G-series filter regulator line runs from size 200 to 600, with automatic, manual or differential-pressure drains, 40 um or 5 um (W) elements, embedded square or external round gauges, and an optional reverse/check valve (K). Flow is published as curves rather than a single rating, so we confirm datasheet and sizing figures on request.
Airtac GFR Filter Regulator GFR400C15AC1 Technical Specifications
| Model | Airtac GFR Filter Regulator GFR400C15AC1 |
|---|---|
| Series | GFR400 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFR Filter Regulator GFR400C15AC1
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · See datasheet · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-C1 (two-unit set) |
Where the Airtac GFR Filter Regulator GFR400C15AC1 Is Used
Pneumatic press feed on a stamping line
Sits in the 1/2 in supply line to a pneumatic punching press, dropping shop air to the press working pressure while the automatic drain clears condensate without an operator.
Packaging line clamp cylinders
Conditions the air feeding clamp and stopper cylinders on a packaging conveyor, with the round MPa gauge giving line staff a visible pressure setpoint.
Solenoid valve manifold supply in a bottling plant
Placed ahead of solenoid valve stacks on a bottling line to remove water and particulate and hold a steady regulated pressure to the valves.
Is the Airtac GFR Filter Regulator GFR400C15AC1 the Right Unit?
Step up or down by air demand: this is the 400 size with a 1/2 in port, sitting between the 300 (3/8 in) and 600 (3/4 in and 1 in) frames. The drain here is automatic, which suits unattended plant; manual and differential-pressure drains are available on the same series. The element is the standard 40 um grade, and the gauge is the external round type in MPa - square gauges and psi or bar scales are catalogue options. PT is the standard thread, with G (BSPP) and NPT orderable as catalogue options, and a mounting bracket is included as standard (J variants omit it). Because AirTAC publishes flow as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
Airtac GFR Filter Regulator GFR400C15AC1 FAQ
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number on the page. Send us your line pressure and air demand and we will confirm the flow from the datasheet on request before you order.
It specifies an external round pressure gauge scaled in MPa. The embedded square gauge is the default on GFR units, psi (2) and bar (3) scales are catalogue options, and gauge-less N variants exist if you do not need a gauge at all.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac GFR Filter Regulator GFR400C15AC1
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.