Airtac GFR Filter Regulator GFR400C15F2WT
The AirTAC GFR Filter Regulator GFR400C15F2WT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFR Filter Regulator GFR400C15F2WT
The AirTAC GFR series is a filter regulator: compressed air is cleaned of water and particulate, then held at a set downstream pressure in one body. GFR400C15F2WT is the 400 size with 1/2 in NPT ports, a 5 um filter element, a differential-pressure drain on the polycarbonate bowl and an embedded square gauge scaled in psi. Maximum inlet pressure is 1.0 MPa (145 psi); with the differential-pressure drain the regulated output spans 0.15-0.9 MPa (20-130 psi). Operating temperature is -5 to 70 C, non-freezing, and the medium is compressed air.
This is a genuine AirTAC part from the G series, which runs from size 200 to 600 with 40 um standard or 5 um fine filtration, differential-pressure, automatic or manual drains, square or round gauges in MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so we confirm flow and full datasheet details on request.
Airtac GFR Filter Regulator GFR400C15F2WT Technical Specifications
| Model | Airtac GFR Filter Regulator GFR400C15F2WT |
|---|---|
| Series | GFR400 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFR Filter Regulator GFR400C15F2WT
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · See datasheet · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-C1 (two-unit set) |
Where the Airtac GFR Filter Regulator GFR400C15F2WT Is Used
CNC fixture clamping
Feeding clean, regulated air to the swing clamps and support cylinders on a CNC machining fixture, with the 5 um element helping keep water and dirt carried in compressed air out of the clamp valves.
Actuated valve skids
Providing the filtered pilot supply for pneumatically actuated ball and butterfly valves on a water treatment dosing skid, with the regulator set to the actuator's rated pressure.
Vacuum ejector supply
Supplying the compressed-air side of single-stage vacuum ejectors on a robotic pick-and-place cell, where filtered, regulated air keeps the ejector nozzles from fouling.
Is the Airtac GFR Filter Regulator GFR400C15F2WT the Right Unit?
Step through the G series by size - 200, 300, 400, 600 - as port size and flow capacity rise; the 400 frame with 1/2 in ports suits lines with heavier demand. The remaining choices are real code positions: drain (differential-pressure here, automatic or manual to order), filter grade (40 um standard, 5 um as selected), gauge scale (MPa, psi or bar), thread (PT standard, G or NPT to order) and bracket. Because flow is published as curves, not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
Airtac GFR Filter Regulator GFR400C15F2WT FAQ
AirTAC publishes G-series flow as performance curves, not as a single rated figure, so there is no one number we can quote honestly. Send us your supply pressure, downstream demand and allowable pressure drop, and we will confirm the flow data and the full datasheet on request.
Yes. Gauges come in MPa, psi or bar scales, and the thread is available as PT (standard), G (BSPP) or NPT. Drain type (differential-pressure, automatic or manual) and filter grade (40 um standard or 5 um fine) are selectable too. Tell us the variant you need and we will confirm the correct order code.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac GFR Filter Regulator GFR400C15F2WT
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.