Airtac GFR Filter Regulator GFR400C15JC1W
The AirTAC GFR Filter Regulator GFR400C15JC1W is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFR Filter Regulator GFR400C15JC1W
The AirTAC GFR series is a filter regulator: compressed air is cleaned of water and particulate, then held at a set downstream pressure in one body. GFR400C15JC1W is the 400 size with 1/2 in PT ports, a 5 um fine filter element (the W option instead of the standard 40 um), a differential-pressure drain on the polycarbonate bowl and an external round gauge scaled in MPa. The J in the code means the mounting bracket is omitted; a bracket is available as an option. Maximum inlet pressure is 1.0 MPa (145 psi) and the regulated output with the differential-pressure drain spans 0.15-0.9 MPa (20-130 psi). Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part from the G series, which spans sizes 200 to 600 with 40 um standard or 5 um fine filtration, differential-pressure, automatic or manual drains, square or round gauges in MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so we confirm flow and datasheet details on request.
Airtac GFR Filter Regulator GFR400C15JC1W Technical Specifications
| Model | Airtac GFR Filter Regulator GFR400C15JC1W |
|---|---|
| Series | GFR400 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFR Filter Regulator GFR400C15JC1W
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · See datasheet · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-C1 (two-unit set) |
Where the Airtac GFR Filter Regulator GFR400C15JC1W Is Used
Laboratory instrument air
Supplying regulated air to autosamplers and small pneumatic actuators on analytical instruments, where the 5 um element reduces particulate and water carryover ahead of sensitive instrument valves.
Electronics assembly benches
Feeding pick-and-place pens, air nippers and small cylinders at electronics assembly workstations, with fine filtration protecting the compact components downstream.
Finishing bay touch-up
Regulating air to touch-up spray guns and air brushes in a woodshop finishing bay, where cleaner air supports consistent atomiser and nozzle condition.
Is the Airtac GFR Filter Regulator GFR400C15JC1W the Right Unit?
Match the size to demand: 200, 300, 400 and 600 step up in port size and flow capacity, with the 400 frame carrying 1/2 in ports here. Your selectable positions: filter grade (5 um fine on this W-code, 40 um standard otherwise), drain (differential-pressure here, automatic or manual to order), gauge type and scale (round MPa here; square or round, MPa, psi or bar), thread (PT standard, G or NPT to order) and bracket (omitted on this J-code; add one as an option). Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
Airtac GFR Filter Regulator GFR400C15JC1W FAQ
Flow is published by AirTAC as performance curves, not a single rated figure, so we cannot honestly quote one number. Give us your supply pressure, downstream demand and allowable pressure drop and we will confirm the flow data and the full datasheet on request.
The blank grade (40 um) is the standard general-purpose filtration for typical plant air; the W code specifies the 5 um element for finer protection of sensitive downstream equipment. Both variants remove water and particulate and carry the same differential-pressure drain; we can confirm the right grade for your circuit on request.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac GFR Filter Regulator GFR400C15JC1W
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.