Airtac GFR Filter Regulator GFR400C15MJC1
The AirTAC GFR Filter Regulator GFR400C15MJC1 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFR Filter Regulator GFR400C15MJC1
The AirTAC GFR series filters water and particulate from compressed air and regulates pressure in a single body. The GFR400C15MJC1 is the 400 size with a PT1/2 port, a manual drain bowl, the standard 40 um element, an external round pressure gauge on an MPa scale, and no mounting bracket (the J code), suiting installations where the body is fixed by its own port connections or a customer plate. Maximum inlet pressure is 1.0 MPa (145 psi), the manual-drain regulation range is 0.05-0.9 MPa (7-130 psi), and the polycarbonate bowl is rated for -5 to 70 C, non-freezing.
This is a genuine AirTAC part. Across the G series you can move between sizes 200 to 600, ports from 1/8 to 1 inch, automatic or differential-pressure drains, a 5 um element, embedded square or external round gauges in MPa, psi or bar scales, G (BSPP) or NPT threads, and bracket options. Flow appears in the catalogue as curves, not a single rating, so we confirm the figures you need from the datasheet on request.
Airtac GFR Filter Regulator GFR400C15MJC1 Technical Specifications
| Model | Airtac GFR Filter Regulator GFR400C15MJC1 |
|---|---|
| Series | GFR400 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFR Filter Regulator GFR400C15MJC1
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · See datasheet · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-C1 (two-unit set) |
Where the Airtac GFR Filter Regulator GFR400C15MJC1 Is Used
Spray booth gun supply
Regulate atomizing air to spray guns at a paint booth wall, where the 40 um element catches pipe scale and water carryover and the external round gauge gives the painter a clear set-point reading.
Valve manifold prep panel
Drop into the prep panel ahead of a machine's directional-valve manifold, regulating one stable supply pressure for the whole station while the manual drain is bled during scheduled maintenance.
Pneumatic assembly press
Set and hold the working pressure for a light pneumatic bench press, with the round MPa gauge letting operators re-verify the setting at every product changeover.
Is the Airtac GFR Filter Regulator GFR400C15MJC1 the Right Unit?
Take the 400 size for 1/2 inch porting or when the smaller 300 body would sit at the top of its flow curve - ask us to check the curve against your duty before ordering. The manual drain keeps the lowest regulation floor (0.05-0.9 MPa / 7-130 psi) and suits units an operator can reach; automatic or differential drains suit enclosed or unattended panels. The standard 40 um element is right for general machine air prep; step to the W-coded 5 um element for fine pilot valves. The C code here orders an external round gauge on an MPa scale instead of the embedded square default, with psi and bar scales also available. Thread is PT as standard; G (BSPP) and NPT are catalogue options, and the J code deletes the bracket.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
Airtac GFR Filter Regulator GFR400C15MJC1 FAQ
Flow for this series is published as curves rather than a single rated number, so there is no one figure to quote. Share your operating pressure and demand and we will confirm the sizing from the datasheet on request.
It orders an external round pressure gauge on an MPa scale instead of the default embedded square gauge. Both indicate the regulated downstream pressure; the round gauge is often chosen for panel doors and enclosures where it is read at a glance. Psi and bar scales are also available to order.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac GFR Filter Regulator GFR400C15MJC1
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.