Airtac GFR Filter Regulator GFR400C15MJF1
The AirTAC GFR Filter Regulator GFR400C15MJF1 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFR Filter Regulator GFR400C15MJF1
GFR400C15MJF1 is an AirTAC GFR400 filter regulator: filtration and pressure regulation combined in one body, with a drain bowl but no lubricator. This configuration comes with a manual drain, the standard 40 um filter element, an embedded square pressure gauge with MPa scale, and no mounting bracket. The port is PT1/2 (1/2 in PT thread, the standard for this code) and the bowl is polycarbonate (PC) at size 400. Regulator setting range with the manual drain is 0.05-0.9 MPa (7-130 psi); maximum working pressure is 1.0 MPa (145 psi) and operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, G (BSPP) and NPT thread options, a choice of differential-pressure, automatic or manual drains, and 40 um or 5 um elements. Flow is published as curves rather than a single rating, so we confirm the datasheet and sizing on request.
Airtac GFR Filter Regulator GFR400C15MJF1 Technical Specifications
| Model | Airtac GFR Filter Regulator GFR400C15MJF1 |
|---|---|
| Series | GFR400 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFR Filter Regulator GFR400C15MJF1
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · See datasheet · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-C1 (two-unit set) |
Where the Airtac GFR Filter Regulator GFR400C15MJF1 Is Used
Plant air header take-off
Sits at the drop from a rotary-screw compressor ring main, knocking out bulk water and pipe scale and setting a stable working pressure for the downstream workshop.
Robotic weld-cell gripper supply
Conditions the air feeding end-of-arm grippers and clamp cylinders in a weld cell, keeping actuator pressure repeatable from cycle to cycle.
Bottling line rinsing and fill valves
Regulates the supply to rinsing nozzles and fill-valve actuators on a bottling line, where a steady setpoint keeps valve timing consistent.
Is the Airtac GFR Filter Regulator GFR400C15MJF1 the Right Unit?
Size 400 with a 1/2 in PT port serves medium-to-high plant air demand; step to the neighbouring size or port only after checking the published flow curve against your consumption. The manual drain (M) gives the wider 0.05-0.9 MPa (7-130 psi) setting range, while automatic or differential-drain versions set 0.15-0.9 MPa (20-130 psi). The standard 40 um element covers general plant air; order the W suffix for the 5 um grade where finer filtration is needed. Gauges are available as the embedded square type (as here) or an external round type, in MPa, psi or bar scales; G (BSPP) and NPT threads are catalogue options and a bracket can be ordered. Flow is published as curves, not a single rating, so ask us to confirm sizing before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
Airtac GFR Filter Regulator GFR400C15MJF1 FAQ
There is no single rated figure to quote: AirTAC publishes G-series flow as curves only. Tell us your required flow and upstream pressure and we will confirm the sizing from the datasheet on request.
This code carries the embedded square gauge with an MPa scale (F1). If your team works in psi or bar, the gauge scale can be specified as 2 or 3 respectively at ordering, and an external round gauge is also available as an alternative to the square type.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac GFR Filter Regulator GFR400C15MJF1
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.