Airtac GFR Filter Regulator GFR400C15MJNWK
The AirTAC GFR Filter Regulator GFR400C15MJNWK is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFR Filter Regulator GFR400C15MJNWK
The GFR400C15MJNWK is an AirTAC GFR400 filter regulator: a filter and a pressure regulator in one body with a single polycarbonate drain bowl. It is sized for 1/2in PT ports, and the trailing K suffix adds a check valve to the configuration. The M suffix specifies manual drainage, so the bowl is emptied by hand on a maintenance schedule, and the W suffix fits the 5 um filter element instead of the 40 um standard grade. No gauge is fitted (N suffix) and no mounting bracket is included (J suffix). Regulating range with manual drainage is 0.05-0.9 MPa (7-130 psi) against a maximum inlet pressure of 1.0 MPa (145 psi); working temperature is -5 to 70 C.
This is a genuine AirTAC part. The same 400 frame is available across the G series in 200, 300, 400 and 600 sizes with ports from 1/8in to 1in, and can be ordered with automatic or differential-pressure drainage, the 40 um element, a gauge, a mounting bracket, G (BSPP) or NPT threads, with or without the check valve. Flow is published as performance curves rather than a single rated figure, so ask us and we will confirm the datasheet figures for your application on request.
Airtac GFR Filter Regulator GFR400C15MJNWK Technical Specifications
| Model | Airtac GFR Filter Regulator GFR400C15MJNWK |
|---|---|
| Series | GFR400 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFR Filter Regulator GFR400C15MJNWK
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · See datasheet · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-C1 (two-unit set) |
Where the Airtac GFR Filter Regulator GFR400C15MJNWK Is Used
Clamping fixture line in a machining cell
Regulated, filtered air to the swing clamps on a CNC machining cell fixture, taken from a 1/2in drop, with the check valve included in the configuration as coded.
Sorting gate actuation
Air prep for the diverter and stopper cylinders on a parcel sorting conveyor, where the unit sits at the head of each 1/2in branch line.
Pneumatic press counterbalance supply
Filtered, regulated air to the counterbalance and ejection cylinders of a small pneumatic press, with manual drainage fitting a pressside attended each shift.
Is the Airtac GFR Filter Regulator GFR400C15MJNWK the Right Unit?
Step through the G series frames (200, 300, 400, 600) to match air demand; this unit carries the 1/2in PT port in the 400 frame. The trailing K adds the check valve - order this suffix when your circuit calls for one, or the same code without K when it does not. Manual drainage is the right choice where an operator drains the bowl on schedule; automatic and differential-pressure drains exist on the same frame. The W suffix gives the 5 um element against the standard 40 um grade, and a gauge with MPa, psi or bar scale can be added since none is fitted. Threads are PT as standard with G (BSPP) and NPT as ordering options; the J suffix omits the bracket. Because rated flow is published as curves and not a single number, send us your flow requirement and we will confirm sizing against the AirTAC datasheet before you order.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
Airtac GFR Filter Regulator GFR400C15MJNWK FAQ
Flow for the GFR series is published as performance curves rather than a single rated figure, so there is no one number we can honestly quote here. Send us your line pressure and air demand and we will confirm the sizing against the datasheet on request.
The trailing K specifies that a check valve is fitted in this unit. The same 400 frame, port, manual drain and 5 um element are available without the K suffix if your circuit does not call for a check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac GFR Filter Regulator GFR400C15MJNWK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.