Airtac GPF Oil Mist Separator GPF40010M
Genuine AirTAC mist separator, order code GPF40010M from the GPF400 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Port3/8" (10)
- Bowl · drainPC bowl · Differential + manual drain
- Configuration0.3 µm element (M) · With bracket · PT thread
- Port3/8" (10), 1/2" (15)
- ThreadPT (standard)
- Filter element0.3 µm (M) / 0.01 µm (D), 99.9% efficiency
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GPF Oil Mist Separator GPF40010M
GPF40010M specifies the AirTAC GP-series mist separator in its bracketed 3/8 inch form: port size 10 with PT thread as standard, a transparent PC bowl, and the M element that removes oil mist and particles down to 0.3 um at 99.9 percent efficiency. Rated flow is 1100 L/min measured at inlet 0.7 MPa and outlet 0.5 MPa.
Because the code carries no J, the mounting bracket is included, so the unit can stand alone on a wall or machine frame as well as lead a GA-series combination. The PC bowl's 89 cc reservoir drains through the differential plus manual arrangement; working pressure is 0.15 - 1.0 MPa (20 - 145 psi) with 1.5 MPa (215 psi) proof pressure and a -5 to +70 C, no-freezing temperature window.
Airtac GPF Oil Mist Separator GPF40010M Technical Specifications
| Order code | GPF40010M |
|---|---|
| Product | Mist Separator |
| Port | 3/8" (10) |
| Bowl · drain | PC bowl · Differential + manual drain |
| Configuration | 0.3 µm element (M) · With bracket · PT thread |
| Port | 3/8" (10), 1/2" (15) |
|---|---|
| Thread | PT (standard) |
| Filter element | 0.3 µm (M) / 0.01 µm (D), 99.9% efficiency |
| Drain bowl capacity | 89 cc |
| Weight | 620 g / 627 g |
| Fluid | Air |
| Operating pressure | 0.15 – 1.0 MPa (20 – 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -5 to +70 °C (no freezing) |
| Rated flow | M: 1100 L/min · D: 600 L/min (inlet 0.7 MPa, outlet 0.5 MPa) |
Source: AirTAC Products Catalog 2026A (p.240, PDF01-P0242), GPF ordering code and specifications.
How to choose
GPF40010M is the default choice for a 3/8 inch PT line where the separator mounts on its own bracket - drop the J and you get GPF40010JM, identical hardware but unmounted, meant for GA-series sets or pipework that carries its own fixing.
Upgrade within the same body by replacing M with D for 0.01 um filtration (rated flow falls to 600 L/min), swap the drain to A for automatic, choose C or N bowls for metal or nylon, or G / T thread suffixes for G and NPT. For 1/2 inch lines start at GPF40015.
Applications
Replacement of a bracketed separator
When an existing GP-series unit with bracket and manual drain needs renewal, GPF40010M restores the 0.3 um, 99.9 percent element and 89 cc PC bowl on a 3/8 inch PT port.
Air supply for conveyor actuation
Installed on its included bracket beside a conveyor run, the 1100 L/min rated flow covers 3/8 inch PT feed lines driving conveyor stops, lifts and diverters.
Adding a coalescing stage to an FRL chain
Mount the bracketed separator after a GA filter-regulator to strip oil mist the primary filter misses, using the differential plus manual drain for scheduled emptying.
FAQ
Which figures define the GPF40010M?
Port 3/8 inch (10) with PT thread; PC bowl, 89 cc capacity, differential plus manual drain; 0.3 um M element, 99.9 percent efficiency; rated flow 1100 L/min at inlet 0.7 MPa, outlet 0.5 MPa; operating pressure 0.15 - 1.0 MPa (20 - 145 psi); proof pressure 1.5 MPa (215 psi); temperature -5 to +70 C, no freezing; mounting bracket included.
What is the difference between GPF40010M and GPF40010JM?
Only the mounting: M includes the bracket, JM lists the same 3/8 inch PT, PC-bowl, 0.3 um configuration without one. Everything else in the specifications, including the 89 cc bowl and the 1100 L/min rated flow, matches.