Airtac GPF Oil Mist Separator GPF40015AD
Genuine AirTAC mist separator, order code GPF40015AD from the GPF400 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Port1/2" (15)
- Bowl · drainPC bowl · Automatic drain (A)
- Configuration0.01 µm element (D) · With bracket · PT thread
- Port3/8" (10), 1/2" (15)
- ThreadPT (standard)
- Filter element0.3 µm (M) / 0.01 µm (D), 99.9% efficiency
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GPF Oil Mist Separator GPF40015AD
GPF40015AD combines the three biggest upgrades in the GPF400 ordering table: 1/2 inch port size 15 on PT thread, the D element rated 0.01 um at 99.9 percent efficiency, and an automatic drain on the 89 cc PC bowl. Rated flow for the D element is 600 L/min at inlet 0.7 MPa with outlet 0.5 MPa.
The A suffix lets the bowl empty itself of accumulated condensate, useful where nobody drains by hand, and the included bracket lets the 1/2 inch body stand on a frame or head a GA-series set. Pressure capability is unchanged across the series: 0.15 - 1.0 MPa (20 - 145 psi) operating, 1.5 MPa (215 psi) proof, -5 to +70 C without freezing.
Airtac GPF Oil Mist Separator GPF40015AD Technical Specifications
| Order code | GPF40015AD |
|---|---|
| Product | Mist Separator |
| Port | 1/2" (15) |
| Bowl · drain | PC bowl · Automatic drain (A) |
| Configuration | 0.01 µm element (D) · With bracket · PT thread |
| Port | 3/8" (10), 1/2" (15) |
|---|---|
| Thread | PT (standard) |
| Filter element | 0.3 µm (M) / 0.01 µm (D), 99.9% efficiency |
| Drain bowl capacity | 89 cc |
| Weight | 620 g / 627 g |
| Fluid | Air |
| Operating pressure | 0.15 – 1.0 MPa (20 – 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -5 to +70 °C (no freezing) |
| Rated flow | M: 1100 L/min · D: 600 L/min (inlet 0.7 MPa, outlet 0.5 MPa) |
Source: AirTAC Products Catalog 2026A (p.240, PDF01-P0242), GPF ordering code and specifications.
How to choose
Pick GPF40015AD over the GPF40015M sibling when oil aerosol must be cut to 0.01 um rather than 0.3 um - accept that rated flow drops from 1100 to 600 L/min. Over GPF40015D it adds the automatic drain, so condensate leaves the 89 cc PC bowl without manual rounds.
If your line is 3/8 inch, drop to the GPF40010 series; for metal or nylon bowls choose C or N instead of PC, for G or NPT threads add G or T, and if you mount inside a GA-series combination that provides its own hardware, append J to delete the bracket.
Applications
Clean air for test rigs and instruments
The 0.01 um D element at 99.9 percent efficiency polishes 1/2 inch PT supply air for pneumatic measuring fixtures and lab actuators sensitive to oil carryover.
Protecting sensitive pneumatic circuits
Feed proximity-controlled valve terminals and pilot circuits through the D element so sub-micron oil mist cannot foul spools, while the automatic drain keeps the 89 cc PC bowl clear unattended.
Unattended packaging machine air prep
On 1/2 inch packaging lines that run shifts without an operator at the FRL station, the A drain empties condensate automatically and the bracket holds the unit beside the machine.
FAQ
What are the key specifications of the GPF40015AD?
Port 1/2 inch (15), PT thread; PC bowl, 89 cc, automatic drain (A); 0.01 um D element, 99.9 percent efficiency; rated flow 600 L/min at inlet 0.7 MPa and outlet 0.5 MPa; operating pressure 0.15 - 1.0 MPa (20 - 145 psi); proof pressure 1.5 MPa (215 psi); temperature -5 to +70 C, no freezing; bracket included.
Why is the rated flow lower on this code than on GPF40015M?
The D suffix specifies the finer 0.01 um element, which is more restrictive than the 0.3 um M element, so rated flow is 600 L/min against 1100 L/min for M. If your 1/2 inch line needs the higher flow and 0.3 um filtration is enough, order the M version and keep the automatic drain by adding A.