Airtac GPF Oil Mist Separator GPF40015AJD
Genuine AirTAC mist separator, order code GPF40015AJD from the GPF400 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Port1/2" (15)
- Bowl · drainPC bowl · Automatic drain (A)
- Configuration0.01 µm element (D) · No bracket (J) · PT thread
- Port3/8" (10), 1/2" (15)
- ThreadPT (standard)
- Filter element0.3 µm (M) / 0.01 µm (D), 99.9% efficiency
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GPF Oil Mist Separator GPF40015AJD
Inside the GPF40015AJD sits the D-grade 0.01 um coalescing element of the AirTAC GPF400, removing oil mist and fine particles at 99.9% efficiency on a 1/2 inch (size 15) PT-threaded body. The transparent PC bowl collects up to 89 cc of condensate, and the A-option automatic drain discharges it without an operator having to touch the unit.
The finer medium costs flow: this build is rated for 600 L/min at 0.7 MPa inlet and 0.5 MPa outlet, against 1100 L/min for the M element. Operating pressure is 0.15 to 1.0 MPa (20 to 145 psi), proof pressure 1.5 MPa (215 psi), and the working temperature runs from -5 to +70 C with no freezing. Because the code carries J, no mounting bracket is supplied.
Airtac GPF Oil Mist Separator GPF40015AJD Technical Specifications
| Order code | GPF40015AJD |
|---|---|
| Product | Mist Separator |
| Port | 1/2" (15) |
| Bowl · drain | PC bowl · Automatic drain (A) |
| Configuration | 0.01 µm element (D) · No bracket (J) · PT thread |
| Port | 3/8" (10), 1/2" (15) |
|---|---|
| Thread | PT (standard) |
| Filter element | 0.3 µm (M) / 0.01 µm (D), 99.9% efficiency |
| Drain bowl capacity | 89 cc |
| Weight | 620 g / 627 g |
| Fluid | Air |
| Operating pressure | 0.15 – 1.0 MPa (20 – 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -5 to +70 °C (no freezing) |
| Rated flow | M: 1100 L/min · D: 600 L/min (inlet 0.7 MPa, outlet 0.5 MPa) |
Source: AirTAC Products Catalog 2026A (p.240, PDF01-P0242), GPF ordering code and specifications.
How to choose
Choose GPF40015AJD over its M-element sibling GPF40015AJM when the circuit needs 0.01 um air and your consumption stays within 600 L/min instead of 1100 L/min. Both share the 1/2 inch port, PC bowl, automatic drain and the bracketless J suffix; if a bracket is required, order the equivalent code without J (GPF40015AD). A 3/8 inch line points to the size-10 GPF40010AJD instead.
Applications
Precision measuring and instrumentation air
Feeding air gauges, sensors and precision actuators where sub-micron oil mist must be stripped out before it reaches measurement surfaces.
Coating and spray-air conditioning
Supplying very clean air to coating equipment on a 1/2 inch branch, with the automatic drain clearing the 89 cc PC bowl between shifts.
GA-series multi-unit assemblies
Serving as the final coalescing stage in GA two- or three-unit sets; the J suffix suits builds whose base plate already provides the fixing.
FAQ
What are the key figures of the GPF40015AJD?
Port 1/2 inch, size 15, PT thread; PC bowl of 89 cc with automatic drain (A); 0.01 um D element at 99.9% efficiency; rated flow 600 L/min at 0.7 MPa inlet and 0.5 MPa outlet; operating pressure 0.15 to 1.0 MPa (20 to 145 psi), proof pressure 1.5 MPa (215 psi); temperature -5 to +70 C, no freezing; supplied without bracket (J).
Why does this D-element model pass less air than the M version?
The 0.01 um coalescing medium is denser than the 0.3 um M element, so the rated flow falls from 1100 L/min to 600 L/min under the same inlet and outlet condition. Size the circuit so consumption stays below 600 L/min, or select GPF40015AJM if that margin is too tight.