Airtac GPF Oil Mist Separator GPF400C15JM
Genuine AirTAC mist separator, order code GPF400C15JM from the GPF400 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Port1/2" (15)
- Bowl · drainMetal bowl (C) · Differential + manual drain
- Configuration0.3 µm element (M) · No bracket (J) · PT thread
- Port3/8" (10), 1/2" (15)
- ThreadPT (standard)
- Filter element0.3 µm (M) / 0.01 µm (D), 99.9% efficiency
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GPF Oil Mist Separator GPF400C15JM
In the AirTAC GPF400 ordering code, the J suffix deletes the mounting bracket, so GPF400C15JM is the version you thread straight into the line. It pairs the 1/2 inch (15) PT port with a metal bowl and differential + manual drain, and runs a 0.3 um M element that captures oil mist and fine particles at 99.9% efficiency. Rated flow is 1100 L/min at 0.7 MPa inlet and 0.5 MPa outlet.
The metal bowl holds 89 cc of condensate and the operating window is 0.15 - 1.0 MPa (20 - 145 psi) at -5 to +70 C with no freezing, backed by a 1.5 MPa (215 psi) proof pressure. Because no bracket is included, plan a direct port, manifold or inline mounting.
Airtac GPF Oil Mist Separator GPF400C15JM Technical Specifications
| Order code | GPF400C15JM |
|---|---|
| Product | Mist Separator |
| Port | 1/2" (15) |
| Bowl · drain | Metal bowl (C) · Differential + manual drain |
| Configuration | 0.3 µm element (M) · No bracket (J) · PT thread |
| Port | 3/8" (10), 1/2" (15) |
|---|---|
| Thread | PT (standard) |
| Filter element | 0.3 µm (M) / 0.01 µm (D), 99.9% efficiency |
| Drain bowl capacity | 89 cc |
| Weight | 620 g / 627 g |
| Fluid | Air |
| Operating pressure | 0.15 – 1.0 MPa (20 – 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -5 to +70 °C (no freezing) |
| Rated flow | M: 1100 L/min · D: 600 L/min (inlet 0.7 MPa, outlet 0.5 MPa) |
Source: AirTAC Products Catalog 2026A (p.240, PDF01-P0242), GPF ordering code and specifications.
How to choose
Pick GPF400C15JM when the filter screws directly into a machine port and the bracket of GPF400C15M would go unused - dropping it keeps the mounting footprint off the assembly. If your process needs 0.01 um filtration, the same configuration is ordered as GPF400C15JD, but the finer D element lowers rated flow to 600 L/min. Nylon-bowl buyers should compare GPF400N15JM, and 3/8 inch lines use port code 10 instead of 15.
Applications
Machine-mounted point of use
Thread the PT body directly into a 1/2 inch machine inlet on CNC or automation equipment where a protruding bracket would clash with guards or panels.
Hot or spark-prone zones
The metal bowl (C) suits areas near welding or hot works where a PC bowl is a concern, with the differential + manual drain holding up to 89 cc between checks.
Downstream valve protection
Fit upstream of directional valves and cylinders fed from a main FRL set; the 0.3 um element at 99.9% efficiency strips oil mist they cannot tolerate.
FAQ
What are the key figures of the GPF400C15JM?
Port 1/2 inch (15), PT thread; 0.3 um M element at 99.9% efficiency; rated flow 1100 L/min (0.7 MPa inlet, 0.5 MPa outlet); operating pressure 0.15 - 1.0 MPa (20 - 145 psi); proof pressure 1.5 MPa (215 psi); temperature -5 to +70 C, no freezing; metal bowl capacity 89 cc; bracket not included (J).
How is condensate removed and what does the J change?
Drainage is by the standard differential + manual arrangement, so an operator drains the metal bowl during checks. The J in the order code simply means the mounting bracket is omitted - order GPF400C15M if you need one.