Airtac GTFR Filter Regulator GTFR20006S
Genuine AirTAC filter regulator, order code GTFR20006S from the GTFR200 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Port1/8" (06)
- Type · gaugeStandard (S) · With gauge (MPa/psi)
- ConfigurationWith bracket · 40 µm element · PT thread
- Port1/8" (06), 1/4" (08)
- ThreadPT (standard)
- Filter element40 µm (standard), 5 µm (W)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GTFR Filter Regulator GTFR20006S
The AirTAC GTFR20006S is the standard, fully fitted build of the GTFR200 filter regulator on a 1/8 inch (06) PT-threaded body. The S code selects the standard pressure type rather than the low-pressure L version, and the blank element position keeps the standard 40 um filter element - the right grade for everyday shop air feeding tools and small actuators.
A pressure gauge is included so the regulated setting can be read directly on the unit, and the mounting bracket is included because no J appears in the code. The short PC bowl drains by differential plus manual action, the compact GT200 format that carries the GA200 feature set into tighter spaces.
Airtac GTFR Filter Regulator GTFR20006S Technical Specifications
| Order code | GTFR20006S |
|---|---|
| Product | Filter Regulator |
| Port | 1/8" (06) |
| Type · gauge | Standard (S) · With gauge (MPa/psi) |
| Configuration | With bracket · 40 µm element · PT thread |
| Port | 1/8" (06), 1/4" (08) |
|---|---|
| Thread | PT (standard) |
| Filter element | 40 µm (standard), 5 µm (W) |
| Bowl | Short PC bowl |
| Drain | Differential + manual |
| Fluid | Air |
| Low-pressure (L) version | 0.15 – 0.4 MPa (20 – 58 psi) |
Source: AirTAC Products Catalog 2026A (p.235, PDF01-P0237), GT200 ordering code and specifications.
How to choose
Pick GTFR20006S for 1/8 inch lines with conventional pressure requirements; GTFR20006L is the sibling for circuits regulated down to 0.15 - 0.4 MPa (20 - 58 psi), and GTFR20008S moves the package to 1/4 inch (08) ports. Adding W changes the element to 5 um, N deletes the gauge, K adds a check valve, and J - as in GTFR20006SJ - removes the bracket.
Applications
Point-of-use workshop drops
A gauge-regulated branch feed for hand tools at a bench, with the 40 um element straining general line dirt before it reaches the tool.
Small actuator supply
Filtered and regulated air for compact cylinders and rotary units on 1/8 inch branches, with the fitted gauge making setpoints easy to verify.
Pilot and signal circuits
Clean, regulated pilot air for valves and machine controls where the standard 40 um filtration grade is sufficient.
FAQ
What are the key figures of the GTFR20006S?
Port 1/8 inch (code 06), PT thread; standard S pressure type; 40 um filter element; differential plus manual drain on a short PC bowl; pressure gauge and mounting bracket included; no check valve; fluid air.
How does GTFR20006S differ from GTFR20006SJ?
Only the bracket: the SJ code carries J, so that unit comes without a mounting bracket, while the plain S build includes one. Gauge, 40 um element, ports and bowl are the same.