Airtac GTFR Filter Regulator GTFR20006SJ
Genuine AirTAC filter regulator, order code GTFR20006SJ from the GTFR200 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Port1/8" (06)
- Type · gaugeStandard (S) · With gauge (MPa/psi)
- ConfigurationNo bracket (J) · 40 µm element · PT thread
- Port1/8" (06), 1/4" (08)
- ThreadPT (standard)
- Filter element40 µm (standard), 5 µm (W)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GTFR Filter Regulator GTFR20006SJ
The AirTAC GTFR20006SJ is a GT200-series filter regulator on 1/8 inch (06) PT ports whose J code deletes the mounting bracket. Everything else matches the standard 06S build: the standard pressure type, the fitted pressure gauge, and the standard 40 um filter element for general shop air.
Without a bracket, the short PC bowl body is secured through its own 1/8 inch ports - the typical approach on valve stacks, manifolds and panels where a separate bracket only gets in the way. Drain is differential plus manual, in the compact GT200 format that keeps the GA200 feature set in a smaller unit.
Airtac GTFR Filter Regulator GTFR20006SJ Technical Specifications
| Order code | GTFR20006SJ |
|---|---|
| Product | Filter Regulator |
| Port | 1/8" (06) |
| Type · gauge | Standard (S) · With gauge (MPa/psi) |
| Configuration | No bracket (J) · 40 µm element · PT thread |
| Port | 1/8" (06), 1/4" (08) |
|---|---|
| Thread | PT (standard) |
| Filter element | 40 µm (standard), 5 µm (W) |
| Bowl | Short PC bowl |
| Drain | Differential + manual |
| Fluid | Air |
| Low-pressure (L) version | 0.15 – 0.4 MPa (20 – 58 psi) |
Source: AirTAC Products Catalog 2026A (p.235, PDF01-P0237), GT200 ordering code and specifications.
How to choose
Choose GTFR20006SJ over GTFR20006S only when the bracket is surplus to requirements; both share the standard pressure type, 40 um element and gauge. Dropping the J restores the bracket, GTFR20006SN would remove the gauge, GTFR20006L serves circuits regulated down to 0.15 - 0.4 MPa (20 - 58 psi), and 08 replaces 06 for 1/4 inch ports.
Applications
Valve stack mounting
Bolting the regulator directly into a stack or manifold, where the 1/8 inch PT ports carry the unit and the J version's missing bracket saves clutter.
OEM panel integration
Machine builders ordering by the J code fit the gauge-equipped unit inside their own fabricated panels rather than using the supplied bracket design.
Compact cabinet retrofits
The short PC bowl and port-fixed installation suit tight electrical or pneumatic cabinets where wall space for a bracket does not exist.
FAQ
What are the key figures of the GTFR20006SJ?
Port 1/8 inch (code 06), PT thread; standard S pressure type; 40 um filter element; differential plus manual drain on a short PC bowl; pressure gauge included; no mounting bracket (J); no check valve; fluid air.
What does the J remove, and what stays in place?
J deletes only the mounting bracket. The gauge, the 40 um element and the PT-threaded 1/8 inch ports are unchanged, and a K in the code would be needed to add a check valve.