Airtac GTFR Filter Regulator GTFR20008L
Genuine AirTAC filter regulator, order code GTFR20008L from the GTFR200 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Port1/4" (08)
- Type · gaugeLow-pressure (L) · With gauge (MPa/psi)
- ConfigurationWith bracket · 40 µm element · PT thread
- Port1/8" (06), 1/4" (08)
- ThreadPT (standard)
- Filter element40 µm (standard), 5 µm (W)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GTFR Filter Regulator GTFR20008L
The AirTAC GTFR20008L is the low-pressure, 1/4 inch port version of the GTFR200 filter regulator. The L option changes the regulating range to 0.15 to 0.4 MPa (20 to 58 psi), the band used by circuits and processes that run well below standard supply pressure, and the unit still carries a fitted pressure gauge so the setting can be read directly.
It keeps the standard 40 um element and the short PC bowl characteristic of the GT200 series, the compact design that preserves GA200 features for restricted spaces, with condensate removed by differential plus manual drain. The bracket is included because the code has no J, and PT threads are standard since no G or T is specified.
Airtac GTFR Filter Regulator GTFR20008L Technical Specifications
| Order code | GTFR20008L |
|---|---|
| Product | Filter Regulator |
| Port | 1/4" (08) |
| Type · gauge | Low-pressure (L) · With gauge (MPa/psi) |
| Configuration | With bracket · 40 µm element · PT thread |
| Port | 1/8" (06), 1/4" (08) |
|---|---|
| Thread | PT (standard) |
| Filter element | 40 µm (standard), 5 µm (W) |
| Bowl | Short PC bowl |
| Drain | Differential + manual |
| Fluid | Air |
| Low-pressure (L) version | 0.15 – 0.4 MPa (20 – 58 psi) |
Source: AirTAC Products Catalog 2026A (p.235, PDF01-P0237), GT200 ordering code and specifications.
How to choose
Two choices define this code: the 08 port for 1/4 inch air lines and the L type for the 0.15 to 0.4 MPa (20 to 58 psi) range. If your line is 1/8 inch, take the 06 codes instead; if the application runs at normal supply pressure, the S versions are the correct type and the L range would be wrong for the job. This code uses the standard 40 um element, so for finer 5 um filtration add W to the same order code. J, N, G and T respectively remove the bracket, remove the gauge, or switch to G or NPT threads.
Applications
Low-pressure process air
Where a process must run at gentle pressure, the L version regulates in the 0.15 to 0.4 MPa (20 to 58 psi) band, with the fitted gauge showing the setting and the 40 um element conditioning the 1/4 inch supply.
Light-duty conveyor actuation
On 1/4 inch circuits driving small conveyor stops or pushers that need only soft pressure, this low-pressure unit sets the working point while the differential plus manual drain empties the short PC bowl.
Main FRL position on small machines
As the 1/4 inch supply point of a compact machine, the GT200 short-bowl body saves depth versus GA200, the included bracket simplifies mounting, and the 40 um element handles general upstream air.
FAQ
What are the key figures of the GTFR20008L?
Port 1/4 inch (08), PT thread standard, low-pressure type (L) regulating 0.15 to 0.4 MPa (20 to 58 psi), pressure gauge fitted, standard 40 um element, short PC bowl with differential plus manual drain, and mounting bracket included.
When should I pick the L version over the standard GTFR20008S?
Pick L when the circuit must hold a low setting that a standard-type regulator cannot reach accurately: its range is 0.15 to 0.4 MPa (20 to 58 psi). The S version covers the standard pressure range instead. Both share the same 1/4 inch port, short PC bowl and drain; only the type letter in the order code changes.