Airtac GTFR Filter Regulator GTFR20008LJ
Genuine AirTAC filter regulator, order code GTFR20008LJ from the GTFR200 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Port1/4" (08)
- Type · gaugeLow-pressure (L) · With gauge (MPa/psi)
- ConfigurationNo bracket (J) · 40 µm element · PT thread
- Port1/8" (06), 1/4" (08)
- ThreadPT (standard)
- Filter element40 µm (standard), 5 µm (W)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GTFR Filter Regulator GTFR20008LJ
This GT200-series filter regulator is ordered with the 1/4 inch (08) port, PT thread and the low-pressure L setting, so it regulates downstream air from 0.15 to 0.4 MPa (20 to 58 psi) instead of the standard range. A pressure gauge reading MPa and psi is fitted as standard, and the 40 um element is the stock filtration grade.
The J suffix omits the mounting bracket, so plan for direct panel or manifold fixing. Inside is the short PC bowl of the GT200 line, with a differential plus manual drain, a compact alternative to the full-size GA200 body.
Airtac GTFR Filter Regulator GTFR20008LJ Technical Specifications
| Order code | GTFR20008LJ |
|---|---|
| Product | Filter Regulator |
| Port | 1/4" (08) |
| Type · gauge | Low-pressure (L) · With gauge (MPa/psi) |
| Configuration | No bracket (J) · 40 µm element · PT thread |
| Port | 1/8" (06), 1/4" (08) |
|---|---|
| Thread | PT (standard) |
| Filter element | 40 µm (standard), 5 µm (W) |
| Bowl | Short PC bowl |
| Drain | Differential + manual |
| Fluid | Air |
| Low-pressure (L) version | 0.15 – 0.4 MPa (20 – 58 psi) |
Source: AirTAC Products Catalog 2026A (p.235, PDF01-P0237), GT200 ordering code and specifications.
How to choose
Compare neighbours in the GTFR200 ordering table: GTFR20008L keeps the bracket and gauge, GTFR20008LJN drops the gauge, and GTFR20008LJK adds a check valve. Standard-pressure users need the S type instead, and the W suffix would swap the 40 um element for a 5 um element.
Applications
Low-pressure glue and coating lines
Coating heads and glue jets that cannot tolerate full-line pressure stay inside the 0.15 to 0.4 MPa (20 to 58 psi) window while the fitted gauge tracks the outlet setting.
Pilot supply for air valves
A 1/4 inch PT pilot circuit feeding directional valve actuators gets filtered, regulated air at low pressure, with the MPa and psi gauge readable on the body.
Bench fixtures without bracket hardware
Test rigs and assembly benches that already provide their own mounting use the J configuration, keeping the differential plus manual drain of the short PC bowl accessible.
FAQ
Which figures define GTFR20008LJ?
Port: 1/4 inch (08), PT thread. Type: low-pressure L, regulating 0.15 to 0.4 MPa (20 to 58 psi). Gauge: fitted, reads MPa and psi. Element: 40 um. Bowl: short PC with differential plus manual drain. Bracket: none, per the J suffix.
Can I change the filtration grade or thread later?
Not within this order code: W selects a 5 um element and G or T select G or NPT thread at ordering time, while GTFR20008LJ ships with the standard 40 um element on PT.