Airtac GTFR Filter Regulator GTFR20008LJNWK
Genuine AirTAC filter regulator, order code GTFR20008LJNWK from the GTFR200 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Port1/4" (08)
- Type · gaugeLow-pressure (L) · No gauge (N)
- ConfigurationNo bracket (J) · 5 µm element (W) · PT thread · Check valve (K)
- Port1/8" (06), 1/4" (08)
- ThreadPT (standard)
- Filter element40 µm (standard), 5 µm (W)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GTFR Filter Regulator GTFR20008LJNWK
GTFR20008LJNWK is the fully optioned low-pressure build of the GTFR200 filter regulator: W gives the 5 um element instead of the standard 40 um cartridge, and K adds a check valve so downstream pressure survives an upstream supply loss. The L type regulates 0.15 to 0.4 MPa (20 to 58 psi) through a 1/4 in (08) PT port on the short PC bowl body.
The N and J positions are also active here, so this code arrives without a pressure gauge and without a mounting bracket. Drainage stays differential plus manual, emptying the bowl automatically in normal flow with a hand purge available when needed.
Airtac GTFR Filter Regulator GTFR20008LJNWK Technical Specifications
| Order code | GTFR20008LJNWK |
|---|---|
| Product | Filter Regulator |
| Port | 1/4" (08) |
| Type · gauge | Low-pressure (L) · No gauge (N) |
| Configuration | No bracket (J) · 5 µm element (W) · PT thread · Check valve (K) |
| Port | 1/8" (06), 1/4" (08) |
|---|---|
| Thread | PT (standard) |
| Filter element | 40 µm (standard), 5 µm (W) |
| Bowl | Short PC bowl |
| Drain | Differential + manual |
| Fluid | Air |
| Low-pressure (L) version | 0.15 – 0.4 MPa (20 – 58 psi) |
Source: AirTAC Products Catalog 2026A (p.235, PDF01-P0237), GT200 ordering code and specifications.
How to choose
Among the no-gauge, no-bracket 1/4 in low-pressure codes, this one is the only combination of the 5 um element and the check valve. Pick GTFR20008LJNWK when your load needs both fine air and pressure retention, for example a circuit that must not vent if the feed drops. GTFR20008LJNW keeps the 5 um element but removes the check valve, and GTFR20008LJNK returns to the 40 um element while keeping the valve. Add a gauge or bracket by deleting the N or J position from the code.
Applications
Packaging machines with hold-on loads
Sealing or tuck stations at 0.15 to 0.4 MPa (20 to 58 psi) keep their set pressure through supply dips, thanks to the K check valve on the 1/4 in PT port.
Clean-air circuits in storage automation
Sorter and diverting actuators with tight valve clearances run on the 5 um W element, an upgrade over the standard 40 um cartridge in the same body.
Embedded low-pressure control blocks
The J no-bracket, N no-gauge build plus the short PC bowl makes this code easy to bury inside a control block, with manual drainage for service access.
FAQ
What are the key figures of the GTFR20008LJNWK?
Port: 1/4 in (08), PT thread. Type: low-pressure L, regulating 0.15 to 0.4 MPa (20 to 58 psi). Filter element: 5 um (W). Check valve: fitted (K). Gauge: none (N). Bracket: none (J). Bowl: short PC, differential plus manual drain. Fluid: air.
What do the W and K positions add together?
W replaces the standard 40 um element with a 5 um cartridge for cleaner air, and K adds a check valve that holds downstream pressure when the upstream supply is cut. GTFR20008LJNW has only W, and GTFR20008LJNK has only K with the 40 um element.