Airtac GTFR Filter Regulator GTFR20008LN
Genuine AirTAC filter regulator, order code GTFR20008LN from the GTFR200 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Port1/4" (08)
- Type · gaugeLow-pressure (L) · No gauge (N)
- ConfigurationWith bracket · 40 µm element · PT thread
- Port1/8" (06), 1/4" (08)
- ThreadPT (standard)
- Filter element40 µm (standard), 5 µm (W)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GTFR Filter Regulator GTFR20008LN
On the GTFR200 order code, 08 selects the 1/4 inch PT ports, L selects the low-pressure type that regulates 0.15-0.4 MPa (20-58 psi), and N deletes the pressure gauge. The unit is a GT200-series filter regulator with a short PC bowl, the compact version of the GA200, and it clears condensate through a differential plus manual drain.
Because this code carries no J suffix, a mounting bracket is included, and the blank element position gives the standard 40 um filter element for compressed air. Where a pressure reading is needed at the unit itself, order the same build without the N, or rely on an existing panel gauge.
Airtac GTFR Filter Regulator GTFR20008LN Technical Specifications
| Order code | GTFR20008LN |
|---|---|
| Product | Filter Regulator |
| Port | 1/4" (08) |
| Type · gauge | Low-pressure (L) · No gauge (N) |
| Configuration | With bracket · 40 µm element · PT thread |
| Port | 1/8" (06), 1/4" (08) |
|---|---|
| Thread | PT (standard) |
| Filter element | 40 µm (standard), 5 µm (W) |
| Bowl | Short PC bowl |
| Drain | Differential + manual |
| Fluid | Air |
| Low-pressure (L) version | 0.15 – 0.4 MPa (20 – 58 psi) |
Source: AirTAC Products Catalog 2026A (p.235, PDF01-P0237), GT200 ordering code and specifications.
How to choose
Pick GTFR20008LN instead of GTFR20008S when your process air sits below the standard regulation range; the L type covers 0.15-0.4 MPa (20-58 psi). Compared with GTFR20008LNK, this code omits the check valve, and compared with GTFR20008LNW it keeps the 40 um element rather than the 5 um W element. Dropping the N restores the fitted gauge, while J would remove the included bracket. For a 1/8 inch line use the 06 size, and for G or NPT threads order the G or T suffix instead of blank PT.
Applications
Low-Pressure Spray and Glue Stations
Set 0.15-0.4 MPa (20-58 psi) for coating guns and glue heads that run below the range of a standard-type regulator, with the 40 um element protecting nozzles from debris.
Compact Control Panel Preparation
The GT200 short PC bowl, the space-saving version of the GA200 body, lets this 1/4 inch unit fit shallow cabinets, and the included bracket makes panel mounting simple.
Branch Line Regulation Without Duplication
With N deleting the gauge, the unit suits branch circuits already monitored by a panel gauge, while the differential plus manual drain keeps the short bowl clear of condensate.
FAQ
What are the key figures of the GTFR20008LN?
Port: 1/4 inch, PT thread (08, blank thread position). Type: low-pressure L, regulating 0.15-0.4 MPa (20-58 psi). Gauge: none (N). Element: standard 40 um. Bowl: short PC, differential plus manual drain. Bracket: included (no J). Fluid: air.
Why does this code have no pressure gauge, and can I still read pressure?
The N suffix in GTFR20008LN deletes the fitted gauge, so AirTAC supplies the unit for circuits that already carry a panel gauge or for users who prefer their own instrument. If you want a gauge mounted on the unit, order the same 1/4 inch low-pressure build without the N; the remaining suffixes stay the same.