Airtac GTFR Filter Regulator GTFR20008LNK
Genuine AirTAC filter regulator, order code GTFR20008LNK from the GTFR200 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Port1/4" (08)
- Type · gaugeLow-pressure (L) · No gauge (N)
- ConfigurationWith bracket · 40 µm element · PT thread · Check valve (K)
- Port1/8" (06), 1/4" (08)
- ThreadPT (standard)
- Filter element40 µm (standard), 5 µm (W)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GTFR Filter Regulator GTFR20008LNK
The final K in GTFR20008LNK adds a check valve to the AirTAC GTFR200 filter regulator, so downstream air is held if the upstream supply is lost or drops. The 08 and L positions give 1/4 inch PT ports and the low-pressure range of 0.15-0.4 MPa (20-58 psi), and N deletes the pressure gauge.
Like every GT200-series unit, the body carries a short PC bowl, the compact version of the GA200, drained by a differential plus manual drain. A mounting bracket is included because the code has no J, and the blank element position keeps the standard 40 um element for air service.
Airtac GTFR Filter Regulator GTFR20008LNK Technical Specifications
| Order code | GTFR20008LNK |
|---|---|
| Product | Filter Regulator |
| Port | 1/4" (08) |
| Type · gauge | Low-pressure (L) · No gauge (N) |
| Configuration | With bracket · 40 µm element · PT thread · Check valve (K) |
| Port | 1/8" (06), 1/4" (08) |
|---|---|
| Thread | PT (standard) |
| Filter element | 40 µm (standard), 5 µm (W) |
| Bowl | Short PC bowl |
| Drain | Differential + manual |
| Fluid | Air |
| Low-pressure (L) version | 0.15 – 0.4 MPa (20 – 58 psi) |
Source: AirTAC Products Catalog 2026A (p.235, PDF01-P0237), GT200 ordering code and specifications.
How to choose
Choose GTFR20008LNK over GTFR20008LN when the circuit must retain downstream pressure; the check valve is the only configuration difference between the two codes. Against GTFR20008LNWK, this code filters to 40 um instead of the 5 um W element. The gauge stays deleted (N), the bracket stays included, and the thread stays PT; order G or T for other threads, or 06 for 1/8 inch ports.
Applications
Clamp Circuits with Pressure Retention
The built-in check valve helps keep clamps pressurized if the main supply dips, while the L range of 0.15-0.4 MPa (20-58 psi) suits low-force clamping applications.
Vertical Cylinder Load Holding
An upstream air loss would let a vertically loaded cylinder creep; the check valve in this 1/4 inch unit blocks reverse flow so the regulated downstream pressure is retained.
Packaging Machine Supply Backup
On machines where a brief supply drop must not release held parts, the K check valve plus the short PC bowl keep air preparation compact inside tight machine frames.
FAQ
What are the key figures of the GTFR20008LNK?
Port: 1/4 inch, PT thread (08). Type: low-pressure L, 0.15-0.4 MPa (20-58 psi). Gauge: none (N). Element: standard 40 um. Check valve: included (K). Bowl: short PC, differential plus manual drain. Bracket: included (no J). Fluid: air.
What exactly does the K suffix add in GTFR20008LNK?
K adds a check valve to the GTFR200 filter regulator; it is the only configuration difference from GTFR20008LN. The valve lets air pass downstream during normal operation and blocks reverse flow when the supply side loses pressure. Confirm the check-valve details from the datasheet before using the unit in safety-related circuits.