Airtac GTFR Filter Regulator GTFR20008LW
Genuine AirTAC filter regulator, order code GTFR20008LW from the GTFR200 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Port1/4" (08)
- Type · gaugeLow-pressure (L) · With gauge (MPa/psi)
- ConfigurationWith bracket · 5 µm element (W) · PT thread
- Port1/8" (06), 1/4" (08)
- ThreadPT (standard)
- Filter element40 µm (standard), 5 µm (W)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GTFR Filter Regulator GTFR20008LW
GTFR20008LW reads out its own setting. The L-type low-pressure regulator covers 0.15 to 0.4 MPa (20 to 58 psi) and the fitted gauge shows output directly in MPa and psi, so operators can dial in gentle settings without a separate instrument. Port 08 gives the 1/4 in PT connection, and the W option fits a 5 um element rather than the 40 um standard cartridge.
Condensate collects in the short PC bowl, the compact GT200 bowl format that lets the unit sit where a full-size GA200 will not, and is removed through the differential plus manual drain. Unlike the WK sibling, this code carries no check valve, so downstream air can flow back through the body when supply pressure is removed. A mounting bracket is included because there is no J in the order code.
Airtac GTFR Filter Regulator GTFR20008LW Technical Specifications
| Order code | GTFR20008LW |
|---|---|
| Product | Filter Regulator |
| Port | 1/4" (08) |
| Type · gauge | Low-pressure (L) · With gauge (MPa/psi) |
| Configuration | With bracket · 5 µm element (W) · PT thread |
| Port | 1/8" (06), 1/4" (08) |
|---|---|
| Thread | PT (standard) |
| Filter element | 40 µm (standard), 5 µm (W) |
| Bowl | Short PC bowl |
| Drain | Differential + manual |
| Fluid | Air |
| Low-pressure (L) version | 0.15 – 0.4 MPa (20 – 58 psi) |
Source: AirTAC Products Catalog 2026A (p.235, PDF01-P0237), GT200 ordering code and specifications.
How to choose
GTFR20008LW sits between two siblings. If reverse-flow protection is also needed, order GTFR20008LWK, which adds the check valve to the same gauged, 5 um package. If a gauge is already on your manifold, GTFR20008LNWK deletes it and adds the check valve instead. Both alternatives share the same 1/4 in port and the 0.15 to 0.4 MPa low-pressure band; a different inlet size means stepping to the 06 port code, and non-PT piping means adding G or T for G or NPT threads.
Applications
Low-pressure spray and finishing booths
Operators set atomizing air inside the 0.15 to 0.4 MPa window straight off the MPa/psi gauge, while the 5 um element helps keep clean air at the gun.
Test rigs and flow benches
Repeatable low-pressure points are set and logged against the gauge readout, and the PT 1/4 in ports suit bench pipework and quick manifold changes.
Low-pressure clamping on machining fixtures
Hold delicate workpieces at clamping forces set in the L band; without a check valve the circuit vents back through the unit on controlled shutdown, letting clamps release deliberately.
FAQ
What are the key figures of the GTFR20008LW?
Port 1/4 in (08) with PT thread; low-pressure regulation 0.15 to 0.4 MPa (20 to 58 psi); 5 um filter element (W); short PC bowl with differential plus manual drain; MPa/psi pressure gauge fitted; no check valve; mounting bracket included.
How is condensate handled on this unit?
Water collects in the short PC bowl. The drain works differentially and can also be opened manually, so the bowl should be checked during rounds and drained by hand where differential action alone is not enough. Inspect the 5 um element when air quality or performance suggests it, and confirm element details from the datasheet.