Airtac GTFR Filter Regulator GTFR20008S
Genuine AirTAC filter regulator, order code GTFR20008S from the GTFR200 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Port1/4" (08)
- Type · gaugeStandard (S) · With gauge (MPa/psi)
- ConfigurationWith bracket · 40 µm element · PT thread
- Port1/8" (06), 1/4" (08)
- ThreadPT (standard)
- Filter element40 µm (standard), 5 µm (W)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GTFR Filter Regulator GTFR20008S
As the 1/4 in (08) standard build of the GT200 series, the GTFR20008S combines filtering and pressure regulation in one compact body. GT200 is the short-bowl version of AirTAC's GA200, so the short PC bowl saves space at the point of use, and the filter drains by differential pressure with a manual drain as back-up.
The S code sets the standard pressure type, and the 08 code fixes the ports at 1/4 in with PT threads. A pressure gauge is fitted as standard on this code, the 40 um filter element is the standard element, and a mounting bracket ships with the unit unless the code carries J.
Airtac GTFR Filter Regulator GTFR20008S Technical Specifications
| Order code | GTFR20008S |
|---|---|
| Product | Filter Regulator |
| Port | 1/4" (08) |
| Type · gauge | Standard (S) · With gauge (MPa/psi) |
| Configuration | With bracket · 40 µm element · PT thread |
| Port | 1/8" (06), 1/4" (08) |
|---|---|
| Thread | PT (standard) |
| Filter element | 40 µm (standard), 5 µm (W) |
| Bowl | Short PC bowl |
| Drain | Differential + manual |
| Fluid | Air |
| Low-pressure (L) version | 0.15 – 0.4 MPa (20 – 58 psi) |
Source: AirTAC Products Catalog 2026A (p.235, PDF01-P0237), GT200 ordering code and specifications.
How to choose
Start from your line size: 08 means 1/4 in ports, so pick GTFR20006S instead if the air line is 1/8 in. If your process runs at low pressure, the L variant regulates 0.15-0.4 MPa (20-58 psi) rather than the standard S type. Among the 1/4 in standard builds, this code is the full-featured one: GTFR20008SJ deletes the bracket (code J) and GTFR20008SJK also adds a check valve (code K), while W would swap the 40 um element for a 5 um element.
Applications
Point-of-use air preparation
A single 1/4 in unit that filters and regulates at the machine inlet, with the fitted gauge letting operators read the regulated pressure without buying a separate gauge.
Conveyor and actuator supply lines
The short PC bowl keeps the assembly compact along conveyor runs and cylinder drop lines where a full-length GA200 body would not fit.
Set-and-read pressure tuning
The standard gauge supports direct adjustment of regulated pressure on benches and test rigs, with the manual drain giving a way to empty the bowl during service.
FAQ
What are the key figures of the GTFR20008S?
Port 1/4 in (08), PT thread standard, S standard pressure type, pressure gauge fitted, 40 um filter element, mounting bracket included, short PC bowl, differential plus manual drain, fluid air.
Are the gauge and bracket really part of this code?
Yes. On GTFR20008S both are standard: the gauge is fitted unless the ordering code carries N, and the bracket is included unless the code carries J. Neither J nor N appears in this code, so you get the gauge and the bracket.