Airtac GTFR Filter Regulator GTFR20008SJ
Genuine AirTAC filter regulator, order code GTFR20008SJ from the GTFR200 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Port1/4" (08)
- Type · gaugeStandard (S) · With gauge (MPa/psi)
- ConfigurationNo bracket (J) · 40 µm element · PT thread
- Port1/8" (06), 1/4" (08)
- ThreadPT (standard)
- Filter element40 µm (standard), 5 µm (W)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GTFR Filter Regulator GTFR20008SJ
The GTFR20008SJ is the 1/4 in (08) standard-pressure GT200 filter regulator ordered with the J option, which means it ships without the mounting bracket. The unit itself is unchanged: short PC bowl in the compact GT200 format, a gauge fitted as standard, and a filter that drains by differential pressure with a manual drain for service.
Ports are 1/4 in with PT threads and the 40 um element is the standard element. Choosing J is the right move when the unit will be panel mounted, screwed into an existing manifold, or built into equipment that provides its own fixing, so the bracket would simply be discarded.
Airtac GTFR Filter Regulator GTFR20008SJ Technical Specifications
| Order code | GTFR20008SJ |
|---|---|
| Product | Filter Regulator |
| Port | 1/4" (08) |
| Type · gauge | Standard (S) · With gauge (MPa/psi) |
| Configuration | No bracket (J) · 40 µm element · PT thread |
| Port | 1/8" (06), 1/4" (08) |
|---|---|
| Thread | PT (standard) |
| Filter element | 40 µm (standard), 5 µm (W) |
| Bowl | Short PC bowl |
| Drain | Differential + manual |
| Fluid | Air |
| Low-pressure (L) version | 0.15 – 0.4 MPa (20 – 58 psi) |
Source: AirTAC Products Catalog 2026A (p.235, PDF01-P0237), GT200 ordering code and specifications.
How to choose
Compare this code with its siblings before ordering. GTFR20008S is the identical 1/4 in standard unit but with the bracket included, so order that one if you need to wall or machine mount the regulator. GTFR20008SJK keeps the no-bracket J option and adds a check valve (K). If your line is 1/8 in, the 06 port code applies, and the L type regulates 0.15-0.4 MPa (20-58 psi) where low-pressure control is needed; W selects a 5 um element instead of 40 um.
Applications
OEM machine building
Builders who fix the regulator on their own sub-plate or inside a machine frame can order J and avoid paying for a bracket they will not use.
Panel and manifold mounting
The 1/4 in PT ports let the unit screw straight into a prepared panel or manifold, with the fitted gauge still readable at the front of the assembly.
Retrofit into existing circuits
When replacing a similar unit that was never bracket mounted, the no-bracket build drops into the same pipe run without new fixing work.
FAQ
What does the J in GTFR20008SJ change?
Only the bracket. J means the unit is supplied without the mounting bracket; everything else stays as the 1/4 in (08) standard build: gauge fitted, 40 um element, PT thread, short PC bowl, differential plus manual drain.
What are the key figures of the GTFR20008SJ?
Port 1/4 in (08), PT thread standard, S standard pressure type, pressure gauge fitted, 40 um filter element, no bracket (code J), short PC bowl, differential plus manual drain, fluid air.