Airtac GTFR Filter Regulator GTFR20008SJNW
Genuine AirTAC filter regulator, order code GTFR20008SJNW from the GTFR200 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Port1/4" (08)
- Type · gaugeStandard (S) · No gauge (N)
- ConfigurationNo bracket (J) · 5 µm element (W) · PT thread
- Port1/8" (06), 1/4" (08)
- ThreadPT (standard)
- Filter element40 µm (standard), 5 µm (W)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GTFR Filter Regulator GTFR20008SJNW
The GTFR20008SJNW is the fine-filtration build of the AirTAC GT200 filter regulator for 1/4 in (08) lines. The W option swaps the standard 40 um element for a 5 um element, catching finer particles before air reaches valves and actuators. The body is the short PC bowl version of GA200, so you keep the same features in a unit sized for cramped panels, with differential plus manual drain.
Ports are 1/4 in with PT thread, and the N and J options mean no pressure gauge and no mounting bracket are fitted. If a single element serves both a general line and a sensitive device, this code cleans the whole 1/4 in branch rather than one point of use.
Airtac GTFR Filter Regulator GTFR20008SJNW Technical Specifications
| Order code | GTFR20008SJNW |
|---|---|
| Product | Filter Regulator |
| Port | 1/4" (08) |
| Type · gauge | Standard (S) · No gauge (N) |
| Configuration | No bracket (J) · 5 µm element (W) · PT thread |
| Port | 1/8" (06), 1/4" (08) |
|---|---|
| Thread | PT (standard) |
| Filter element | 40 µm (standard), 5 µm (W) |
| Bowl | Short PC bowl |
| Drain | Differential + manual |
| Fluid | Air |
| Low-pressure (L) version | 0.15 – 0.4 MPa (20 – 58 psi) |
Source: AirTAC Products Catalog 2026A (p.235, PDF01-P0237), GT200 ordering code and specifications.
How to choose
Order GTFR20008SJNW instead of GTFR20008SJN when the 40 um standard element is too coarse for your downstream components; the two codes differ only in the W suffix. If you need the gauge and bracket that this code omits, use GTFR20008SW, which ships with both fitted. On a 1/8 in line choose the 06 size with W, and for pressures from 0.15 - 0.4 MPa (20 - 58 psi) select the L type, GTFR20008SLNW.
Applications
Protecting pneumatic sensors and valves
The 5 um element filters finer particles than the standard 40 um grade on a 1/4 in branch feeding pilot valves and position switches.
Lab and test-rig air prep
Cleaner supply air for bench rigs running on 1/4 in PT drops, where gauge and bracket live elsewhere in the setup.
Packaging machine air feed
Fine filtration on compact packaging heads where the short PC bowl and manual drain keep the footprint small inside guarding.
FAQ
What are the key figures of the GTFR20008SJNW?
Port: 1/4 in (08), PT thread standard. Type: S, standard pressure. Element: 5 um (W option, instead of the 40 um standard). Gauge: none (N), bracket: none (J). Bowl: short PC with differential plus manual drain. Fluid: air.
How does the W element change maintenance or use?
The W option replaces the 40 um standard element with a 5 um element, so downstream equipment sees cleaner air, which matters for fine pilot circuits and sensitive components. Expect the finer element to load faster in dusty supplies, so check it during the same routine as the manual bowl drain. Confirm replacement element part numbers from the datasheet.