Airtac GTFR Filter Regulator GTFR20008SW
Genuine AirTAC filter regulator, order code GTFR20008SW from the GTFR200 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Port1/4" (08)
- Type · gaugeStandard (S) · With gauge (MPa/psi)
- ConfigurationWith bracket · 5 µm element (W) · PT thread
- Port1/8" (06), 1/4" (08)
- ThreadPT (standard)
- Filter element40 µm (standard), 5 µm (W)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GTFR Filter Regulator GTFR20008SW
The GTFR20008SW is the gauge-fitted, 5 um version of the 1/4 in GTFR200 filter regulator. AirTAC's GT200 series is the short-bowl take on the GA200, so you get the same feature set in a smaller unit, with a short PC bowl and a differential plus manual drain handling condensate.
Because this code leaves the gauge position blank instead of specifying N, the unit arrives with its pressure gauge fitted, letting you set and monitor regulated pressure right at the point of use. The W suffix fits the 5 um element rather than the standard 40 um element, PT threads come as standard, and the mounting bracket is included since no J is specified.
Airtac GTFR Filter Regulator GTFR20008SW Technical Specifications
| Order code | GTFR20008SW |
|---|---|
| Product | Filter Regulator |
| Port | 1/4" (08) |
| Type · gauge | Standard (S) · With gauge (MPa/psi) |
| Configuration | With bracket · 5 µm element (W) · PT thread |
| Port | 1/8" (06), 1/4" (08) |
|---|---|
| Thread | PT (standard) |
| Filter element | 40 µm (standard), 5 µm (W) |
| Bowl | Short PC bowl |
| Drain | Differential + manual |
| Fluid | Air |
| Low-pressure (L) version | 0.15 – 0.4 MPa (20 – 58 psi) |
Source: AirTAC Products Catalog 2026A (p.235, PDF01-P0237), GT200 ordering code and specifications.
How to choose
Take GTFR20008SW when you want local pressure reading plus the finer 5 um filtration on a 1/4 in line. Against it: GTFR20008S is the gauge-fitted unit with the standard 40 um element; GTFR20008SNW gives the same 5 um element but drops the gauge; GTFR20008SWK would add the K check valve; GTFR20006SW is the 1/8 in port version. For the low-pressure regulating range of 0.15 to 0.4 MPa (20 to 58 psi), order the L type instead of S.
Applications
Point-of-use pressure setting
Machine stations where operators adjust working pressure locally: the fitted gauge shows regulated pressure on the spot, so no separate gauge has to be plumbed in downstream.
Maintenance and fault finding
Servicing pneumatic equipment on 1/4 in circuits: a quick glance at the gauge distinguishes a supply problem from a downstream fault, while the 5 um element rules out fine contamination.
Air for instruments and process tools
Supplying measuring and process devices that need verified, clean air: the 5 um element filters finer than the 40 um standard and the gauge documents the pressure actually delivered.
FAQ
What are the key figures of the GTFR20008SW?
GT200 series filter regulator with a 1/4 in (08) port, PT threads as standard and the standard (S) regulating type. This code fits a 5 um element (W), includes the pressure gauge (no N suffix), a short PC bowl with differential plus manual drain, and a mounting bracket (no J suffix). The series low-pressure L version regulates 0.15 to 0.4 MPa (20 to 58 psi); confirm the standard-type regulating range from the datasheet.
Why order GTFR20008SW instead of GTFR20008S or GTFR20008SNW?
GTFR20008S is the same gauge-fitted 1/4 in unit but with the standard 40 um element, while GTFR20008SNW has the 5 um element yet omits the gauge under the N option. GTFR20008SW is the only one of the three that combines the 5 um element (W) with a fitted pressure gauge, so it is the code to specify when both cleaner air and a local pressure reading matter.