Airtac GTL Lubricator GTL20006J
Genuine AirTAC lubricator, order code GTL20006J from the GTL200 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Port1/8" (06)
- BracketNo bracket (J)
- ThreadPT thread
- Port1/8" (06), 1/4" (08)
- ThreadPT (standard)
- BowlShort PC bowl
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GTL Lubricator GTL20006J
GTL20006J carries the J option in the GTL200 ordering system, which stands for supply without mounting bracket. Everything else matches the base unit: a 1/8 inch (06) port, PT thread as standard, and the short PC bowl of the GT200-series lubricator body.
Deleting the bracket suits builds where the lubricator is screwed directly into a manifold, panel or existing FRL stack rather than standing on a wall. Draining stays the same as the rest of the series, with a differential plus manual drain, and the short bowl keeps clearance tight inside cabinets.
Airtac GTL Lubricator GTL20006J Technical Specifications
| Order code | GTL20006J |
|---|---|
| Product | Lubricator |
| Port | 1/8" (06) |
| Bracket | No bracket (J) |
| Thread | PT thread |
| Port | 1/8" (06), 1/4" (08) |
|---|---|
| Thread | PT (standard) |
| Bowl | Short PC bowl |
| Drain | Differential + manual |
| Fluid | Air |
Source: AirTAC Products Catalog 2026A (p.235, PDF01-P0237), GT200 ordering code and specifications.
How to choose
Compare the bracket question first: GTL20006 includes a bracket, while this J-coded unit omits it, so pick GTL20006 if you need to fasten the lubricator to a surface and GTL20006J if it will be threaded into a manifold or manifold-mounted FRL set. Both share the 1/8 inch (06) port; for a 1/4 inch line the sibling is GTL20008, and for non-PT threads the ordering table lists G and T thread options instead of the blank PT used here.
Applications
Manifold-mounted lubrication
Thread the 1/8 inch PT body straight into a filter-regulator-lubricator manifold where the bracket would be unused, taking advantage of the J option without a spare part.
Control cabinet air supply
Lubricate the air feed inside a compact electrical or pneumatic cabinet, using the short PC bowl of the GT200 series where height is limited.
Valve island feed
Provide oil mist upstream of a small valve island on a 1/8 inch PT circuit, with the differential plus manual drain letting operators clear condensate at service time.
FAQ
What does the J mean and what are the key figures of the GTL20006J?
J means the unit is supplied without a mounting bracket. Key figures: port 1/8 inch (06), PT thread standard, short PC bowl, differential plus manual drain, fluid air, GT200-series short-bowl body.
Can I get the same lubricator with a bracket or other threads?
Yes. GTL20006 is the same 1/8 inch PT unit with the bracket included, and the ordering code table lists G and T thread options for G and NPT connections in place of standard PT.