
The AirTAC JSID Double Rod Cylinder JSID125X1000 is a genuine double acting, double rod JIS-standard air cylinder with a Ø125mm bore and 1000mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
Delivering 5734 N of thrust in both directions at 0.5 MPa, the AirTAC JSID125X1000 uses a twin-rod layout to provide identical push and pull power. A piston rod exits both ends, which prevents torsion and creates a perfectly symmetric load path for heavy-duty guiding tasks. This JIS profile body is noticeably shorter than an ISO 15552 cylinder of the same bore, and it carries a G1/2 port.
Because the rod-side annular area drives the motion, the output force remains equal both ways, peaking at 8028 N at 0.7 MPa. Note that this specific SKU lacks a magnet, so it cannot support CMSE or DMSE sensors without upgrading to the -S variant.
| Model | Airtac JSID Double Rod Cylinder JSID125X1000 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø125 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, double rod |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 5734 N | 5734 N |
| 0.7 MPa | 8027 N | 8027 N |
| Max (@1.0 MPa) | 1169 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 125 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Drives two synchronized forming tools from opposite rod ends, ensuring parallel contact and equal clamping force across a wide press bed.
Lifts heavy vertical loads with a balanced, non-rotating motion, using the twin rods to prevent platform twist during elevation.
Pushes a product from one lane to another using the front rod while the rear rod simultaneously retracts a diverter cam.
When sizing this unit, the 125 mm bore sits at the top of the range, delivering 5734 N at 0.5 MPa, whereas stepping down to the 100 mm bore yields 3574 N. The double-rod architecture is the right call when your mechanism demands strict anti-rotation, needs to drive two tools at once, or requires a sensor cam on the back end. You can mount it via FA, LB, TC, TCM1, or TCM2 brackets. Because this model has a 1000 mm stroke, you must use external guides to prevent rod bending under side loads. Also, remember this non-magnetic version cannot accept position switches.
Quick checklist
Because it is a double-rod cylinder, force is equal in both directions: 5734 N at 0.5 MPa and 8028 N at 0.7 MPa. The theoretical maximum is 1169 kgf at 1.0 MPa. The operating speed ranges from 30 to 500 mm/s.
No, the air cushions only decelerate the piston near the stroke ends and do not act as a brake. If you need to hold a load in place, you must install an external rod lock or a pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.