
The AirTAC JSID Double Rod Cylinder JSID125X150 is a genuine double acting, double rod JIS-standard air cylinder with a Ø125mm bore and 150mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
Delivering 5734 N of thrust in both directions at 0.5 MPa, this 125 mm bore double-rod actuator uses a G1/2 port to move substantial loads. The twin-rod layout provides a symmetric load path that resists torsional twist, while the hard-anodized aluminum profile barrel keeps the total envelope more compact than a same-bore ISO 15552 unit.
Because the piston rod passes through both covers, the effective area is identical on extension and retraction. It runs at 30-500 mm/s, and since this specific SKU lacks the -S magnet, it cannot accept CMSE or DMSE position sensors.
| Model | Airtac JSID Double Rod Cylinder JSID125X150 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø125 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 5734 N | 5734 N |
| 0.7 MPa | 8027 N | 8027 N |
| Max (@1.0 MPa) | 1169 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 125 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Drives two synchronized machining heads from opposite rod ends, using the symmetric layout to keep heavy vertical tooling perfectly balanced without twisting.
Feeds strapping material from one rod end while the opposite end actuates a tensioning cam, leveraging the 5734 N equal force for heavy-duty packaging cycles.
Ejects dense stamped parts from a press bed using matched force both ways, ensuring positive ejection and a controlled return stroke under high inertia.
Sizing this 125 mm bore against its neighbors shows a steep step in capability: the 100 mm version provides 3574 N both ways, while this 125 mm hits 5734 N at 0.5 MPa, sitting at the top of the range. Choose the double-rod format when a job demands anti-rotation guidance, twin tooling driven from one piston, or a cam for back-end sensing. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. For any stroke at or above 300 mm, always support the load with an external guide to prevent side-load damage to the seals.
Quick checklist
The G1/2 port feeds a 32 mm rod that yields equal force in both directions: 5734 N at 0.5 MPa and 8028 N at 0.7 MPa. The theoretical maximum is 1169 kgf at 1.0 MPa.
No. The air cushion only decelerates near the stroke end; a plain cylinder drifts on air loss, so use an external rod lock or pilot-operated check valve for holding. Also, this SKU lacks a magnet, so it cannot take CMSE or DMSE sensors without the -S option.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.