verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC JSI Series · JIS Standard Cylinder

Airtac JSID Double Rod Cylinder JSID125X150S

The AirTAC JSID Double Rod Cylinder JSID125X150S is a genuine double acting, double rod JIS-standard air cylinder with a Ø125mm bore and 150mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.

  • BoreØ125 mm
  • Stroke150 mm
  • Port sizeG1/2
  • Acting typeDouble acting, double rod
  • Rod threadM27×2.0
  • CushionAdjustable, 33 mm
$292.15 $299.65Save 2% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every JSID125 stroke, mounting and version on one page All JSID125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac JSID Double Rod Cylinder JSID125X150S

Delivering 5734 N of equal force in both directions at 0.5 MPa, this double-rod JIS profile cylinder is built for heavy-duty symmetry. The hard-anodized aluminum barrel keeps the unit more compact than a same-bore ISO 15552 cylinder, while the G1/2 port handles the high airflow needed for the 125 mm bore.

The integrated -S magnet allows CMSE/DMSE sensors to drop directly into the side grooves for precise position detection.

Airtac JSID Double Rod Cylinder JSID125X150S Technical Specifications

ModelAirtac JSID Double Rod Cylinder JSID125X150S
SeriesJSI JIS-standard profile cylinder
Bore sizeØ125 mm
Stroke150 mm
Acting typeDouble acting, double rod
Port sizeG1/2
Rod threadM27×2.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionAdjustable, 33 mm
Max standard strokeUp to 1500 mm

Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).

Theoretical Output Force (Ø125mm)

PressurePush forcePull force
0.5 MPa5734 N5734 N
0.7 MPa8027 N8027 N
Max (@1.0 MPa)1169 kgf

Double-rod: the rod passes through both covers, so output force is equal in both directions.

Model Code: Airtac JSID Double Rod Cylinder JSID125X150S

JSIDJIS-standard profile cylinder (double-rod type).
125Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125).
×150Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensors.

JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.

Where the Airtac JSID Double Rod Cylinder JSID125X150S Is Used

precision_manufacturing

Twin-Spindle Lift

Drives two opposing machining spindles simultaneously from a single piston, ensuring perfectly synchronized tool approach using the equal both-ways force.

conveyor_belt

Symmetric Transfer Gate

Moves a heavy material transfer gate from either end, using the dual rods to prevent torsional twist and maintain precise parallel tracking.

warehouse

Pallet Stopper Arm

Actuates a high-mass pallet stopping arm where the rear rod extension conveniently mounts a cam for CMSE/DMSE position sensing.

Is the Airtac JSID Double Rod Cylinder JSID125X150S the Right Cylinder?

Sizing both ways: stepping down to the 80 mm bore yields 2268 N at 0.5 MPa, while this 125 mm bore tops the range at 5734 N equal force each way. Choose the double-rod layout when you need anti-rotation guidance, twin tooling driven from both ends, a symmetric load path, or a rear sensor cam. Mounting options include FA, LB, TC, TCM1, and TCM2. The -S magnet enables switch mounting. For this 150 mm stroke, ensure external guide rails are used to absorb side loads and prevent binding.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Set cushions to minimum, then release gradually.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac JSID Double Rod Cylinder JSID125X150S FAQ

The 125 mm bore generates equal force both ways: 5734 N at 0.5 MPa and 8028 N at 0.7 MPa, with a theoretical max of 1169 kgf at 1.0 MPa. It uses a 32 mm rod, an M27x2.0 rod thread, a G1/2 port, and adjustable 33 mm air cushions at both ends. Speed ranges from 30-500 mm/s.

No, a plain double-rod cylinder will drift if air pressure drops or the valve is centered, as the adjustable air cushion only decelerates the piston near the stroke end. To maintain a vertical load safely, you must install an external rod lock or a pilot-operated check valve.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC JSI Cylinders

Request a Quote for Airtac JSID Double Rod Cylinder JSID125X150S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for JSID125X150S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.