
The AirTAC JSID Double Rod Cylinder JSID125X200 is a genuine double acting, double rod JIS-standard air cylinder with a Ø125mm bore and 200mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
Delivering 5734 N of thrust in both directions at 0.5 MPa, this 125 mm bore double-rod JIS profile cylinder uses a single piston with a rod exiting each end. The symmetric layout creates an identical effective area on both faces, meaning push and pull forces remain perfectly matched at 8028 N when running at 0.7 MPa.
Built with an extruded hard-anodized aluminum barrel, the unit is notably shorter and more compact than an ISO 15552 cylinder of the same bore. It features a 32 mm rod, an M27x2.0 rod-end thread, and a G1/2 port. Adjustable 33 mm air cushions at both ends manage deceleration, while the twin rods resist torsional twist and can drive mirrored tooling simultaneously. Note that this specific SKU lacks a magnet and cannot accept position sensors.
| Model | Airtac JSID Double Rod Cylinder JSID125X200 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø125 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 5734 N | 5734 N |
| 0.7 MPa | 8027 N | 8027 N |
| Max (@1.0 MPa) | 1169 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 125 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Drives two opposing forming tools simultaneously with matched 5734 N force, using the symmetric rod layout to keep pressure perfectly balanced across the workpiece.
Lifts heavy chassis fixtures straight up and down without rotational drift, relying on the dual rods through both covers to resist torsional load.
Shifts a heavy diverter plow back and forth across a belt, using the equal push and pull thrust to ensure consistent indexing speed in both directions.
Sizing this actuator requires comparing the equal-both-ways force against adjacent bores: the 100 mm bore yields 3574 N at 0.5 MPa, while the 125 mm bore listed here provides 5734 N, sitting at the top of the range. Choose the double-rod architecture when your mechanism demands anti-rotation guidance, symmetric load distribution, or needs to drive two opposing tools from one unit. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2 brackets. Because this is a non-magnetized version, it cannot support CMSE or DMSE switches; add the -S suffix for sensing capabilities. For any stroke at or above 300 mm, always use external guide rails to prevent side-loading damage to the seals.
AirtacDistr lists every JSID125 order code with its price on one page at https://airtacdistr.com/products/airtac-jsid125-double-rod-standard-cylinder
Quick checklist
Because the rod passes through both covers, force is equal in both directions: 5734 N at 0.5 MPa and 8028 N at 0.7 MPa. The theoretical maximum is 1169 kgf at 1.0 MPa. Operating speed spans 30-500 mm/s.
This non-S SKU lacks a magnet and cannot take CMSE or DMSE switches. Additionally, a plain cylinder drifts on air loss; the cushions only decelerate near stroke end. To hold a load vertically, install an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.