
The AirTAC JSID Double Rod Cylinder JSID125X25 is a genuine double acting, double rod JIS-standard air cylinder with a Ø125mm bore and 25mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
Delivering 5734 N of thrust in both directions at 0.5 MPa, this 125 mm bore double-rod actuator uses its symmetric piston layout to eliminate rotational twist. The twin rods passing through both covers create an even load path, which is ideal for driving two mechanisms at once or mounting a rear sensor cam. Because the rod occupies both faces, the push and pull forces remain identical at 8028 N when running at 0.7 MPa.
Built to JIS standards with an extruded hard-anodized aluminum profile barrel, the unit is notably shorter than an equivalent ISO 15552 cylinder of the same bore. It features a G1/2 port, a 33 mm adjustable air cushion at each end, and a 25 mm stroke. This specific SKU lacks a magnet, so it cannot accept CMSE or DMSE sensors without switching to the -S variant.
| Model | Airtac JSID Double Rod Cylinder JSID125X25 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø125 mm |
| Stroke | 25 mm |
| Acting type | Double acting, double rod |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 5734 N | 5734 N |
| 0.7 MPa | 8027 N | 8027 N |
| Max (@1.0 MPa) | 1169 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 125 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Drives two parallel lift platforms simultaneously using the protruding rods at each end, ensuring perfectly synchronized vertical movement under heavy 292 kg loads.
Powers a center-mounted diverting arm where the equal push and pull force of 5734 N keeps the gate motion smooth and prevents binding during high-speed sorting.
Applies 8028 N of clamping force at 0.7 MPa without rotational twist, utilizing the dual-rod geometry to keep the press head perfectly aligned on the workpiece.
Sizing this actuator requires comparing the equal-both-ways force against neighboring bores: the 100 mm bore provides 3574 N at 0.5 MPa, while this 125 mm bore jumps to 5734 N, sitting at the top of the range. A double-rod design is the right call when your mechanism demands anti-rotation guidance, symmetric load distribution, or twin tooling driven from one piston. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2 brackets. Since this is a non-magnetized model, position sensing is unavailable. For any application exceeding 300 mm of stroke, always incorporate an external guide to prevent side-load damage to the seals.
Quick checklist
The force is equal in both directions because the rod exits both ends. It generates 5734 N at 0.5 MPa and 8028 N at 0.7 MPa, with a theoretical maximum of 1169 kgf at 1.0 MPa. The air port size is G1/2.
No, a plain double-rod cylinder will drift and cannot hold a load without live air pressure. The 33 mm adjustable cushions only decelerate the piston near the stroke ends. To maintain a vertical position, you must install an external rod lock or a pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.