
The AirTAC JSID Double Rod Cylinder JSID125X400 is a genuine double acting, double rod JIS-standard air cylinder with a Ø125mm bore and 400mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
Delivering 5734 N of thrust in both directions at 0.5 MPa, this 125 mm bore double-rod actuator uses a hard-anodized aluminium profile barrel to stay shorter and more compact than a same-bore ISO 15552 cylinder. The twin rods exit both covers on a single piston, creating a symmetric load path that resists torsional twist while driving two tools simultaneously.
This non-magnet SKU cannot take a sensor, so you would need the -S variant for CMSE/DMSE switches. The 33 mm adjustable air cushions at each end decelerate the 30-500 mm/s motion, but remember a plain cylinder drifts on air loss; fit an external rod lock or pilot-operated check valve for held loads.
| Model | Airtac JSID Double Rod Cylinder JSID125X400 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø125 mm |
| Stroke | 400 mm |
| Acting type | Double acting, double rod |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 5734 N | 5734 N |
| 0.7 MPa | 8027 N | 8027 N |
| Max (@1.0 MPa) | 1169 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 125 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Drives two opposing forming tools with equal 5734 N force, using the symmetric load path to keep the press bed perfectly balanced.
Uses the rear rod extension to trigger a mechanical cam while the front rod shifts a heavy divert arm, saving space on the line.
Sitting at the top of the range, this 125 mm bore outputs 5734 N each way at 0.5 MPa, stepping down from the 100 mm option which provides 3574 N. Because 125 mm is the maximum bore available, moving higher requires a custom solution. Choose the double-rod layout when your machine needs anti-rotation guidance, symmetric load distribution, or a rear rod to drive a secondary mechanism. Mounting options include FA, LB, TC, TCM1 and TCM2. For this 400 mm stroke, external guides are strongly recommended to prevent rod bending under side loads. Note this specific unit lacks a magnet and cannot support CMSE/DMSE sensors.
Quick checklist
Because the rod passes through both covers, force is equal in both directions: 5734 N at 0.5 MPa and 8028 N at 0.7 MPa, with a theoretical max of 1169 kgf at 1.0 MPa. It operates at speeds of 30-500 mm/s, features a G1/2 port, and has 33 mm adjustable cushions at each end.
No, a plain cylinder drifts when air is lost or valves are centered, as the cushions only decelerate near stroke end; use an external rod lock or pilot-operated check valve for holding. Also, this non-S SKU lacks a magnet and cannot take CMSE/DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.