
The AirTAC JSID Double Rod Cylinder JSID125X600 is a genuine double acting, double rod JIS-standard air cylinder with a Ø125mm bore and 600mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
Delivering 5734 N of equal force in both directions at 0.5 MPa, this 125 mm bore double-rod actuator uses its twin rods to prevent torsion and provide a symmetric load path. The hard-anodized extruded aluminum profile makes it more compact and shorter than a same-bore ISO 15552 unit. It drives twin tooling or a rear sensor cam simultaneously.
With a 600 mm stroke, this JIS-standard cylinder requires external guide rails to prevent rod bending under side loads. The G1/2 port feeds the chambers, operating at 30-500 mm/s. As a non-magnetized SKU, it cannot accept position switches without upgrading to the -S variant for CMSE/DMSE sensors.
| Model | Airtac JSID Double Rod Cylinder JSID125X600 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø125 mm |
| Stroke | 600 mm |
| Acting type | Double acting, double rod |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 5734 N | 5734 N |
| 0.7 MPa | 8027 N | 8027 N |
| Max (@1.0 MPa) | 1169 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 125 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Simultaneously drives upper and lower staking tools with equal 5734 N force, ensuring perfectly balanced metal deformation without torsional deflection.
Uses the dual rods to push and pull a heavy diverting flap across a 600 mm span, maintaining a balanced load path that prevents guide binding.
Sizing spans both directions: step down to a bore 100 unit for 3574 N, or step up if you exceed this 125 mm bore's 5734 N at 0.5 MPa. Choose a double-rod configuration when your mechanism demands anti-rotation stability, needs to drive two tools from one piston, or requires a rear-end cam for tracking. Mounting options include FA, LB, TC, TCM1, and TCM2. Because this model lacks the -S magnet, it cannot support CMSE/DMSE sensing. For the 600 mm stroke, always pair the cylinder with an external linear guide to absorb side loads and prevent rod bending.
Quick checklist
Because the rod exits both ends, force is equal in both directions: 5734 N at 0.5 MPa and 8028 N at 0.7 MPa. The theoretical maximum is 1169 kgf at 1.0 MPa. It operates at 30-500 mm/s, features a G1/2 port, and has a 33 mm adjustable air cushion at each end.
No, the air cushion only decelerates near stroke end; it does not lock. On air loss the piston drifts, so use an external rod lock or pilot-operated check valve to hold loads. Additionally, this non-S SKU lacks a magnet and cannot take sensors; you need the -S version for CMSE/DMSE switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.