
The AirTAC JSID Double Rod Cylinder JSID125X600S is a genuine double acting, double rod JIS-standard air cylinder with a Ø125mm bore and 600mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
Delivering 5734 N of thrust in both directions at 0.5 MPa, this 125 mm bore double-rod actuator uses a single piston with a rod exiting each cover to equalize the pressure area. The symmetric load path prevents rotation and twist, making it ideal for driving twin tooling stations or mounting a rear sensor cam. Built to JIS standards, the extruded hard-anodized aluminum profile barrel is noticeably shorter than a same-bore ISO 15552 unit.
The G1/2 port feeds the 32 mm rod, and the -S suffix means a piston magnet is installed for CMSE/DMSE switches. A 33 mm adjustable air cushion decelerates the payload at each end, though an external rod lock is required to hold a load on air loss.
| Model | Airtac JSID Double Rod Cylinder JSID125X600S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø125 mm |
| Stroke | 600 mm |
| Acting type | Double acting, double rod |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 5734 N | 5734 N |
| 0.7 MPa | 8027 N | 8027 N |
| Max (@1.0 MPa) | 1169 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 125 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Drives two opposing machining heads simultaneously with equal 5734 N force, using the symmetric rod path to keep the tools perfectly aligned without twist.
Uses both rod ends to push and pull a heavy conveyor diversion gate, ensuring balanced load distribution across the 600 mm travel.
Sizing this actuator requires checking both neighbors: the 100 mm bore yields 3574 N each way at 0.5 MPa, while the 125 mm bore tops the range at 5734 N. Choose the double-rod configuration when your mechanism demands anti-rotation guidance, symmetric load distribution, or back-end sensing. Mounting options include FA, LB, TC, TCM1, and TCM2. The -S magnet enables direct CMSE/DMSE sensors. Because the stroke is 600 mm, you must support the external load with a guide to prevent rod bending and excessive side loading.
Quick checklist
Force is equal in both directions due to the double rod: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a theoretical max of 1169 kgf at 1.0 MPa. It uses a G1/2 port and operates at speeds of 30-500 mm/s.
No, the 33 mm adjustable cushions only decelerate the piston near the end caps. To hold a load on air loss, you must add an external rod lock or a pilot-operated check valve. The -S magnet allows CMSE/DMSE sensors to track position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.