
The AirTAC JSID Double Rod Cylinder JSID125X75S is a genuine double acting, double rod JIS-standard air cylinder with a Ø125mm bore and 75mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
Delivering 5734 N of thrust in both directions at 0.5 MPa, the AirTAC JSID125X75S uses a twin-rod layout to give you identical push and pull power. A piston rod exits both ends, which creates a symmetric load path that resists torsional twist and lets you mount tooling or a sensor cam at the back. This JIS profile cylinder is notably shorter than an ISO 15552 unit of the same 125 mm bore.
The hard-anodized extruded aluminum barrel keeps the assembly light while housing adjustable 33 mm air cushions at each end. The S suffix means a piston magnet is installed for CMSE or DMSE switches, and the fluid port is G1/2.
| Model | Airtac JSID Double Rod Cylinder JSID125X75S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø125 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 5734 N | 5734 N |
| 0.7 MPa | 8027 N | 8027 N |
| Max (@1.0 MPa) | 1169 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 125 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Drive two opposing forming tools simultaneously from one piston, using the symmetric force to press components from both ends with equal 5734 N pressure.
Actuate a heavy sorting gate where the rod extends through the rear to carry a position cam, ensuring the load path stays balanced and resists torsional twist.
Sizing around the 125 mm bore means looking at the neighbors: the 100 mm bore gives 3574 N both ways at 0.5 MPa, while the 125 mm hits 5734 N. This is the top standard bore, so if you need more than 5734 N you will have to step outside this series. A double-rod cylinder is the right call when you need anti-rotation guidance, twin tooling stations, or a symmetric load path. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. The S suffix equips it for CMSE or DMSE sensors. At a 75 mm stroke side loads are minimal, but for any stroke over 300 mm you should add external guide rails to prevent binding.
Quick checklist
Because the rod passes through both covers, force is equal in both directions: 5734 N at 0.5 MPa and 8028 N at 0.7 MPa. The theoretical max is 1169 kgf at 1.0 MPa. Operating speed is 30-500 mm/s, and it uses a G1/2 port.
No. The S suffix only adds a piston magnet for CMSE or DMSE position switches. The cylinder cannot hold a load without live air, and the 33 mm cushions only decelerate the piston near the ends. For load holding you need an external rod lock or a pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.