verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC JSI Series · JIS Standard Cylinder

Airtac JSID Double Rod Cylinder JSID125X800

The AirTAC JSID Double Rod Cylinder JSID125X800 is a genuine double acting, double rod JIS-standard air cylinder with a Ø125mm bore and 800mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.

  • BoreØ125 mm
  • Stroke800 mm
  • Port sizeG1/2
  • Acting typeDouble acting, double rod
  • Rod threadM27×2.0
  • CushionAdjustable, 33 mm
$509.23 $516.73Save 1% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every JSID125 stroke, mounting and version on one page All JSID125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac JSID Double Rod Cylinder JSID125X800

Delivering 5734 N of equal thrust in both directions at 0.5 MPa, this 125 mm bore double-rod actuator uses the rod-side pressure area on both faces. The twin rods exit both end covers to provide an anti-rotation, symmetric load path. It is a JIS-standard profile cylinder with an extruded hard-anodized aluminum barrel, making it shorter and more compact than an ISO 15552 cylinder of the same bore. Air connects via a G1/2 port.

This 800 mm stroke unit runs at 30-500 mm/s and features 33 mm adjustable air cushions at each end. This plain SKU lacks a magnet and cannot take a sensor; add the -S variant for CMSE/DMSE switches. The air cushion only decelerates the piston near stroke end, so use an external rod lock or pilot-operated check valve to hold a load.

Airtac JSID Double Rod Cylinder JSID125X800 Technical Specifications

ModelAirtac JSID Double Rod Cylinder JSID125X800
SeriesJSI JIS-standard profile cylinder
Bore sizeØ125 mm
Stroke800 mm
Acting typeDouble acting, double rod
Port sizeG1/2
Rod threadM27×2.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionAdjustable, 33 mm
Max standard strokeUp to 1500 mm

Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).

Theoretical Output Force (Ø125mm)

PressurePush forcePull force
0.5 MPa5734 N5734 N
0.7 MPa8027 N8027 N
Max (@1.0 MPa)1169 kgf

Double-rod: the rod passes through both covers, so output force is equal in both directions.

Model Code: Airtac JSID Double Rod Cylinder JSID125X800

JSIDJIS-standard profile cylinder (double-rod type).
125Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125).
×800Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensors.

JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.

Where the Airtac JSID Double Rod Cylinder JSID125X800 Is Used

precision_manufacturing

Twin-Tool Stamping

Drives two synchronized forming tools from opposite rod ends, ensuring perfectly balanced impact force of 5734 N each way.

conveyor_belt

Long-Stroke Transfer

Shifts heavy pallets across an 800 mm span, relying on external guides to manage side loads while the cushions decelerate the mass.

Is the Airtac JSID Double Rod Cylinder JSID125X800 the Right Cylinder?

This 125 mm bore sits at the top of the JSID range, offering 5734 N both ways at 0.5 MPa. If your application needs less force, step down to the 100 mm bore which provides 3574 N both ways. A double-rod design is the right call when you need anti-rotation guidance, twin tooling driven from both ends, or a symmetric load path. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. Because this model has an 800 mm stroke, you must support the load with external guides to prevent rod bending and excessive side loading. This non-magnetic SKU cannot host position sensors; select the -S version to use CMSE/DMSE switches.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Set cushions to minimum, then release gradually.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac JSID Double Rod Cylinder JSID125X800 FAQ

Force is equal in both directions because the rod passes through both covers. It generates 5734 N at 0.5 MPa and 8028 N at 0.7 MPa each way, with a theoretical max of 1169 kgf at 1.0 MPa. Operating speed is 30-500 mm/s, and air connects via a G1/2 port.

No. The 33 mm adjustable air cushions only decelerate the piston near the stroke ends; they do not lock the position. If air pressure drops or the valve centers, the load will drift. You must use an external rod lock or a pilot-operated check valve to hold a load safely.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC JSI Cylinders

Request a Quote for Airtac JSID Double Rod Cylinder JSID125X800

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for JSID125X800 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.