
The AirTAC JSID Double Rod Cylinder JSID125X900S is a genuine double acting, double rod JIS-standard air cylinder with a Ø125mm bore and 900mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
Delivering 5734 N of thrust in both directions at 0.5 MPa, this 125 mm bore double-rod actuator uses a single piston with a rod exiting each cover to ensure perfectly symmetric push and pull forces. The hard-anodized aluminum profile barrel keeps the overall body shorter than a same-bore ISO 15552 unit, and the G1/2 port handles the high air volume needed for the 30-500 mm/s speed range.
Because the rod passes through both ends, the piston cannot twist under offset loads, making it ideal for guiding heavy carriages. The built-in magnet (-S) accepts CMSE/DMSE sensors in the side grooves for end-of-stroke detection.
| Model | Airtac JSID Double Rod Cylinder JSID125X900S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø125 mm |
| Stroke | 900 mm |
| Acting type | Double acting, double rod |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 5734 N | 5734 N |
| 0.7 MPa | 8027 N | 8027 N |
| Max (@1.0 MPa) | 1169 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 125 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Drives two synchronized machining spindles from both rod ends, ensuring perfectly balanced vertical lifting without rotation.
Shifts massive pallets along a conveyor line using the equal 8028 N force at 0.7 MPa, maintaining a stable symmetric load path.
Lifts approximately 292 kg of raw materials in a storage gantry, relying on the dual rods to prevent binding over the 900 mm travel.
This 125 mm bore sits at the top of the JSID range, offering 5734 N each way at 0.5 MPa. If your application is less demanding, stepping down to the 100 mm bore yields 3574 N both ways, saving air volume and footprint. A double-rod design is the right call when you need anti-rotation stability, twin tooling driven from both ends, or a symmetric load path. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. The -S suffix ensures you have a piston magnet ready for CMSE/DMSE switches. Because the stroke is 900 mm, you must use external guides to prevent rod bending and absorb side loads.
Quick checklist
Force is equal in both directions due to the double-rod design. It outputs 5734 N at 0.5 MPa and 8028 N at 0.7 MPa, with a theoretical max of 1169 kgf at 1.0 MPa. The operating speed range is 30-500 mm/s, and it uses a G1/2 port.
No, a plain double-rod cylinder will drift if air is lost, as the adjustable 33 mm cushions only decelerate the piston near stroke end. For load holding, you must install an external rod lock or a pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.