Airtac JSID Double Rod Cylinder JSID40X1000S
The AirTAC JSID Double Rod Cylinder JSID40X1000S is a genuine double acting, double rod JIS-standard air cylinder with a Ø40mm bore and 1000mm stroke, G1/4 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ40 mm
- Stroke1000 mm
- Port sizeG1/4
- Acting typeDouble acting, double rod
- Rod threadM14×1.5
- CushionAdjustable, 20.5 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID40X1000S
Delivering 528 N of equal force in both directions at 0.5 MPa, this 40 mm bore double-rod actuator uses a G1/4 port and a 16 mm rod. The symmetric layout means a rod exits each end, preventing rotation under offset loads while allowing you to mount twin tooling or a rear sensor cam. Built to JIS dimensions, its extruded hard-anodized aluminum profile barrel is shorter and more compact than an ISO 15552 cylinder of the same bore.
With a 1000 mm stroke, the piston speed ranges from 30 to 800 mm/s. The -S suffix adds a piston magnet for CMSE/DMSE switches that drop directly into the side grooves. Note that a plain cylinder drifts on air loss; use an external rod lock or pilot-operated check valve to hold a load.
Airtac JSID Double Rod Cylinder JSID40X1000S Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID40X1000S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, double rod |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20.5 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | 739 N |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID40X1000S
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 40 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID40X1000S Is Used
Tandem Transfer Pusher
Drives two synchronized conveyor lanes at once using the rod extending from each cover, keeping the push force perfectly balanced at 528 N both ways.
Dual-Action Cam Sensing
Uses the rear rod extension to trigger a CMSE/DMSE sensor cam while the front end performs the primary work, maximizing machine timing accuracy.
Is the Airtac JSID Double Rod Cylinder JSID40X1000S the Right Cylinder?
This 40 mm bore sits between the 32 mm (345 N both ways) and the 50 mm (825 N both ways) sizes, giving you 528 N at 0.5 MPa to size precisely. Choose the double-rod configuration when your application demands anti-rotation guidance, a symmetric load path, or rear-end sensing via the -S magnet and CMSE/DMSE switches. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. Because the stroke is 1000 mm, you must support the load with an external guide to prevent rod bending and excessive side loading.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID40X1000S FAQ
Because it is a double-rod cylinder, the force is equal in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a theoretical maximum of 108 kgf at 1.0 MPa. The air port size is G1/4.
The -S indicates a built-in magnet for CMSE/DMSE position switches. It does not hold load on air loss, as the adjustable air cushion only decelerates near stroke end. For load holding, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID40X1000S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.