Airtac JSID Double Rod Cylinder JSID40X160
The AirTAC JSID Double Rod Cylinder JSID40X160 is a genuine double acting, double rod JIS-standard air cylinder with a Ø40mm bore and 160mm stroke, G1/4 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ40 mm
- Stroke160 mm
- Port sizeG1/4
- Acting typeDouble acting, double rod
- Rod threadM14×1.5
- CushionAdjustable, 20.5 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID40X160
Delivering 528 N of equal thrust in both directions at 0.5 MPa, this double-acting JIS profile cylinder uses a single piston with a rod exiting each end. The symmetric layout prevents rotation and provides a stable load path, while the extruded hard-anodized aluminum barrel keeps the unit more compact and shorter than a same-bore ISO 15552 cylinder. It features a G1/4 port and an M14x1.5 rod thread.
The 160 mm stroke operates at 30-800 mm/s, and adjustable 20.5 mm air cushions at both ends decelerate the payload smoothly. Note that this specific SKU lacks a magnet, so it cannot accept CMSE or DMSE sensors.
Airtac JSID Double Rod Cylinder JSID40X160 Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID40X160 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20.5 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | 739 N |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID40X160
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 40 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID40X160 Is Used
Twin-Tool Transfer
Drives two synchronized gripping jaws from opposite rod ends to transfer parts between stations without rotational twist.
Symmetric Lift Platform
Balances a vertical lifting plate equally on both sides, preventing binding and ensuring smooth elevation in packaging lines.
Cam-Actuated Stamping
Uses the rear rod extension to trigger a mechanical limit cam while the front rod performs the stamping operation.
Is the Airtac JSID Double Rod Cylinder JSID40X160 the Right Cylinder?
When sizing this 40 mm bore, stepping down to a 32 mm bore yields 345 N, while stepping up to a 50 mm bore provides 825 N of equal force at 0.5 MPa. The double-rod design is the right call when your application demands anti-rotation guidance, twin tooling driven from both ends, or a symmetric load path. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. Because the stroke is 160 mm, side-load guidance remains manageable, but for any stroke over 300 mm you should add external load guides to prevent bearing wear. Remember that a plain cylinder drifts on air loss; use an external rod lock or pilot-operated check valve if you need to hold a load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID40X160 FAQ
Because it is a double-rod cylinder, the push and pull forces are equal at 528 N at 0.5 MPa and 739 N at 0.7 MPa. The theoretical maximum force is 108 kgf at 1.0 MPa. Operating pressure ranges from 0.15 to 1.0 MPa, and it uses a G1/4 air port.
No, this specific SKU does not have a magnet and cannot accept CMSE or DMSE sensors. You would need the -S variant of this cylinder to enable magnetic position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID40X160
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.