Airtac JSID Double Rod Cylinder JSID40X175
The AirTAC JSID Double Rod Cylinder JSID40X175 is a genuine double acting, double rod JIS-standard air cylinder with a Ø40mm bore and 175mm stroke, G1/4 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ40 mm
- Stroke175 mm
- Port sizeG1/4
- Acting typeDouble acting, double rod
- Rod threadM14×1.5
- CushionAdjustable, 20.5 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID40X175
Delivering 528 N of thrust in both directions at 0.5 MPa, the AirTAC JSID40X175 uses a twin-rod layout to equalize push and pull power. This 40 mm bore actuator features a hard-anodized extruded aluminum profile barrel and a G1/4 port, making it significantly shorter than a same-bore ISO 15552 cylinder.
Because a rod exits both ends on a single piston, the unit provides anti-rotation stability and a symmetric load path for driving dual tooling. Note this SKU lacks a magnet and cannot accept CMSE/DMSE sensors.
Airtac JSID Double Rod Cylinder JSID40X175 Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID40X175 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20.5 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | 739 N |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID40X175
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 40 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID40X175 Is Used
Dual-End Transfer
Simultaneously pushes and pulls two workpieces between machining stations using both rod ends.
Symmetric Forming
Applies 528 N of equal clamping pressure from opposing sides to hold a central component securely.
Is the Airtac JSID Double Rod Cylinder JSID40X175 the Right Cylinder?
Size both ways: the smaller 32 mm bore yields 345 N each way, while the larger 50 mm bore provides 825 N. Choose this 40 mm model when your application demands 528 N of equal bidirectional force. A double-rod design is the right call for anti-rotation guidance, twin tool stations, or mounting a rear sensor cam. Mounting options include FA, LB, TC, TCM1, and TCM2. For this 175 mm stroke, ensure external load guidance to prevent side-load wear. Select the -S variant if you require magnetic sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID40X175 FAQ
Force is equal both ways due to the double-rod design: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum theoretical output of 108 kgf at 1.0 MPa. It uses a G1/4 port.
No. The adjustable air cushion only decelerates the piston near stroke end; it does not lock the load. If air is lost, the cylinder drifts. For vertical load holding, install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID40X175
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.