Airtac JSID Double Rod Cylinder JSID40X200
The AirTAC JSID Double Rod Cylinder JSID40X200 is a genuine double acting, double rod JIS-standard air cylinder with a Ø40mm bore and 200mm stroke, G1/4 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ40 mm
- Stroke200 mm
- Port sizeG1/4
- Acting typeDouble acting, double rod
- Rod threadM14×1.5
- CushionAdjustable, 20.5 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID40X200
Delivering 528 N of equal force in both directions at 0.5 MPa, this 40 mm bore double-rod cylinder uses a G1/4 port and a 200 mm stroke. Because a rod exits both ends on a shared piston, the working area is identical each way, giving you perfectly symmetric thrust for non-rotating guidance or twin-tool setups.
Built to JIS standards with an extruded hard-anodized aluminum profile barrel, it is noticeably shorter than an ISO 15552 cylinder of the same bore. This SKU has no magnet, so it cannot take a CMSE or DMSE sensor.
Airtac JSID Double Rod Cylinder JSID40X200 Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID40X200 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20.5 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | 739 N |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID40X200
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 40 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID40X200 Is Used
Twin-Tool Transfer
Drives two opposing grippers simultaneously from both rod ends, keeping pick-and-place timing perfectly synchronized without extra linkages.
Anti-Rotation Edge Guide
Uses the dual rods to resist torsional twist during a 200 mm push stroke, holding a web guide flat without needing external linear bearings.
Symmetric Forming Stop
Provides equal clamping pressure from both ends of a small press, ensuring the workpiece stays centered during light stamping operations.
Is the Airtac JSID Double Rod Cylinder JSID40X200 the Right Cylinder?
This 40 mm bore sits neatly between the 32 mm (345 N) and 50 mm (825 N) sizes, both delivering equal force each way at 0.5 MPa. Choose the JSID40X200 when a project demands anti-rotation stability, twin tooling driven from both ends, a symmetric load path, or back-end sensor cam actuation. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. For this 200 mm stroke, ensure external guide rails carry any lateral load to prevent binding. Note that this specific SKU lacks the -S magnet, so it cannot support position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID40X200 FAQ
Force is equal in both directions: 528 N at 0.5 MPa and 739 N at 0.7 MPa, with a theoretical max of 108 kgf at 1.0 MPa. It features a 16 mm rod, M14x1.5 rod thread, G1/4 port, and 20.5 mm adjustable air cushions at both ends.
No, this SKU lacks the -S magnet and cannot take CMSE or DMSE sensors. Additionally, a plain cylinder drifts on air loss; the cushions only decelerate near stroke end. For a held vertical load, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID40X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.