Airtac JSID Double Rod Cylinder JSID40X200S
The AirTAC JSID Double Rod Cylinder JSID40X200S is a genuine double acting, double rod JIS-standard air cylinder with a Ø40mm bore and 200mm stroke, G1/4 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ40 mm
- Stroke200 mm
- Port sizeG1/4
- Acting typeDouble acting, double rod
- Rod threadM14×1.5
- CushionAdjustable, 20.5 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID40X200S
Delivering 528 N of thrust in both directions at 0.5 MPa, this 40 mm bore double-rod JIS cylinder uses a single piston with a rod exiting both ends. Because the hard-anodized aluminum profile barrel omits external retaining rods, the overall body is noticeably shorter and more compact than a same-bore ISO 15552 unit.
This 200 mm stroke variant includes a built-in piston magnet for CMSE/DMSE switches that drop directly into the side sensor grooves. Air connects via a G1/4 port, and adjustable 20.5 mm cushions at both ends decelerate the moving load smoothly. Note that the cushion only slows the piston near stroke end; a plain cylinder drifts on air loss, so fit an external rod lock or pilot-operated check valve if you need to hold a suspended load.
Airtac JSID Double Rod Cylinder JSID40X200S Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID40X200S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20.5 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | 739 N |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID40X200S
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 40 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID40X200S Is Used
Twin-Tool Transfer
Drives two synchronized grippers from opposite rod ends to pass parts between workstations without rotation.
Symmetric Lift Station
Balances a 27 kg vertical payload through the center axis, using equal both-ways force to prevent binding on the descent.
Anti-Twist Stopper Gate
Uses the dual rods as a rigid mechanical stop to arrest moving pallets while resisting torsional twist on impact.
Is the Airtac JSID Double Rod Cylinder JSID40X200S the Right Cylinder?
When sizing this double-acting unit, the 40 mm bore sits neatly between the smaller 32 mm option (345 N both ways at 0.5 MPa) and the larger 50 mm bore (825 N both ways). Choose this 40 mm model when your application demands equal force both ways for anti-rotation guidance, twin tooling driven from both rod ends, or a symmetric load path that prevents deflection. The 200 mm stroke is well within the 1200 mm standard limit, though for any stroke of 300 mm or longer you should add an external guide to absorb side loads. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. The integrated -S magnet supports CMSE/DMSE reed or electronic sensors for end-of-stroke confirmation.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID40X200S FAQ
Because the rod passes through both covers, force is equal in both directions. It generates 528 N at 0.5 MPa and 739 N at 0.7 MPa each way, with a theoretical maximum of 108 kgf at 1.0 MPa. The bore uses a G1/4 air port and a 16 mm rod.
The dual-rod layout ensures the pressure area is identical on both faces, giving perfectly equal push and pull force. It also allows you to mount a sensor cam or drive a second tool from the back end while providing superior anti-rotation guidance compared to a single rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID40X200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.